EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 12369-2, EN12369-2 -

Standard
Title
Date
EN 12369-2, EN12369-2
Wood-based panels. Characteristic values for structural design. Plywood
05/08/2004
EN 1237, EN1237
Fertilizers. Determination of bulk density (tapped)
15/12/1995
EN 12370, EN12370
Natural stone test methods. Determination of resistance to salt crystallization
15/08/1999
EN 123700, EN123700
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards
15/05/1997
EN 12371, EN12371
Natural stone test methods. Determination of frost resistance
18/12/2001
EN 12372, EN12372
Natural stone test methods. Determination of flexural strength under concentrated load
15/09/1999
EN 12373-1, EN12373-1
Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
15/07/2001
EN 12373-10, EN12373-10
Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an
15/04/1999
EN 12373-11, EN12373-11
Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at
15/02/2001
EN 12373-12, EN12373-12
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphe
15/02/2001
EN 12373-13, EN12373-13
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotomete
15/02/2001
EN 12373-14, EN12373-14
Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
15/02/2001
EN 12373-15, EN12373-15
Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
15/02/2001
EN 12373-16, EN12373-16
Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
15/07/2001
EN 12373-17, EN12373-17
Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
15/07/2001
EN 12373-18, EN12373-18
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method
15/07/2001
EN 12373-19, EN12373-19
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method
15/07/2001
EN 12373-2, EN12373-2
Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gra
15/04/1999
EN 12373-3, EN12373-3
Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by
15/04/1999
EN 12373-4, EN12373-4
Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dy
15/04/1999
EN 12373-5, EN12373-5
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
15/04/1999
EN 12373-6, EN12373-6
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of
15/04/1999
EN 12373-7, EN12373-7
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of
15/04/1999
EN 12373-8, EN12373-8
Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured an
15/03/1999
EN 12373-9, EN12373-9
Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abr
15/04/1999
EN 12374, EN12374
Packaging. Flexible tubes. Terminology
15/12/1998
EN 12375, EN12375
Packaging. Flexible aluminium tubes. Wall thickness determination method
15/12/1998
EN 12376, EN12376
In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in bi
15/07/1999
EN 12377, EN12377
Packaging. Flexible tubes. Test method for the airtightness of closures
15/03/1999
EN 1238, EN1238
Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
15/09/1999
EN 12380, EN12380
Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
17/12/2002
EN 123800, EN123800
Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards wit
15/05/1997
EN 12381, EN12381
Health informatics. Time standards for healthcare specific problems
02/03/2005
EN 12384, EN12384
Copper and copper alloys. Determination of spring bending limit on strip
15/07/1999
EN 12385-1, EN12385-1
Steel wire ropes. Safety. General requirements
30/10/2002
EN 12385-10, EN12385-10
Steel wire ropes. Safety. Spiral ropes for general applications
07/01/2004
EN 12385-2, EN12385-2
Steel wire ropes. Safety. Definitions, designation and classification
24/07/2003
EN 12385-3, EN12385-3
Steel wire ropes. Safety. Information for use and maintenance
29/09/2004
EN 12385-4, EN12385-4
Steel wire ropes. Safety. Stranded ropes for general lifting applications
30/10/2002
EN 12385-5, EN12385-5
Steel wire ropes. Safety. Stranded ropes for lifts
30/10/2002
EN 12385-6, EN12385-6
Steel wire ropes. Safety. Stranded ropes for mine shafts
26/02/2004
EN 12385-7, EN12385-7
Steel wire ropes. Safety. Locked coil ropes for mine shafts
30/10/2002
EN 12385-8, EN12385-8
Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
12/11/2002
EN 12385-9, EN12385-9
Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
30/10/2002
EN 12386, EN12386
Chemicals used for treatment of water intended for human consumption. Copper sulfate
28/04/2006
EN 12387, EN12387
Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
17/02/2005
EN 1239, EN1239
Adhesives. Freeze-thaw stability
15/07/1998
EN 12390-1, EN12390-1
Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
15/12/2000
EN 12390-2, EN12390-2
Testing hardened concrete. Making and curing specimens for strength tests
15/12/2000
EN 12390-3, EN12390-3
Testing hardened concrete. Compressive strength of test specimens
25/02/2002
EN 12390-4, EN12390-4
Testing hardened concrete. Compressive strength. Specification for testing machines
15/07/2000
EN 12390-5, EN12390-5
Testing hardened concrete. Flexural strength of test specimens
15/12/2000
EN 12390-6, EN12390-6
Testing hardened concrete. Tensile splitting strength of test specimens
15/12/2000
EN 12390-7, EN12390-7
Testing hardened concrete. Density of hardened concrete
15/12/2000
EN 12390-8, EN12390-8
Testing hardened concrete. Depth of penetration of water under pressure
15/12/2000
EN 12391-1, EN12391-1
Chimneys. Execution standard for metal chimneys. Chimneys for non-roomsealed heating appliances
13/07/2004
EN 12392, EN12392
Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipm
15/07/2000
EN 12393-1, EN12393-1
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
15/03/1999
EN 12393-2, EN12393-2
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and
15/03/1999
EN 12393-3, EN12393-3
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmat
15/03/1999
EN 12396-1, EN12396-1
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method
15/03/1999
EN 12396-2, EN12396-2
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method
15/03/1999
EN 12396-3, EN12396-3
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method
15/08/2000
EN 12397, EN12397
Safety requirements for Cableway installations designed to carry persons. Operation
28/10/2004
EN 124, EN124
Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
15/10/1994
EN 1240, EN1240
Adhesives. Determination of hydroxyl value and/or hydroxyl content
15/07/1998
EN 12400, EN12400
Windows and pedestrian doors. Mechanical durability. Requirements and classification
16/12/2002
EN 12402, EN12402
Lead and lead alloys. Methods of sampling for analysis
15/12/1999
EN 12405-1, EN12405-1
Gas meters. Conversion devices. Volume conversion
28/06/2005
EN 12406, EN12406
Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements
15/10/1999
EN 12407, EN12407
Natural stone test methods. Petrographic examination
15/08/2000
EN 12408, EN12408
Safety requirements for cableways installations designed to carry person. Quality control
28/10/2004
EN 12409, EN12409
Rubber and plastics machines. Thermoforming machines. Safety requirements
15/11/1999
EN 1241, EN1241
Adhesives. Determination of acid value
15/07/1998
EN 12410, EN12410
Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
15/10/1999
EN 12412-2, EN12412-2
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames
20/08/2003
EN 12412-4, EN12412-4
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes
19/08/2003
EN 12413, EN12413
Safety requirements for bonded abrasive products
15/11/1999
EN 12414, EN12414
Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
15/11/1999
EN 12415, EN12415
Safety of machine tools. Small numerically controlled turning machines and turning centres
15/01/2001
EN 12416-1, EN12416-1
Fixed firefighting systems. Powder systems. Requiremments and test methods for components
15/07/2001
EN 12416-2, EN12416-2
Fixed firefighting systems. Powder systems. Design, construction and maintenance
15/07/2001
EN 12417, EN12417
Machine tools. Safety. Machining centres
31/08/2001
EN 12418, EN12418
Masonry and stone cutting-off machines for job site. Safety
15/08/2000
EN 1242, EN1242
Adhesives. Determination of isocyanate content
21/11/2005
EN 12420, EN12420
Copper and copper alloys. Forgings
15/07/1999
EN 12421, EN12421
Magnesium and magnesium alloys. Unalloyed magnesium
15/11/1998
EN 12422, EN12422
Sisal twines
15/09/1999
EN 12423, EN12423
Polypropylene twines
15/09/1999
EN 12424, EN12424
Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
15/10/2000
EN 12425, EN12425
Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
15/10/2000
EN 12426, EN12426
Industrial, commercial and garage doors and gates. Air permeability. Classification
15/10/2000
EN 12427, EN12427
Industrial, commercial and garage doors and gates. Air permeability. Test method
15/10/2000
EN 12428, EN12428
Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation
15/10/2000
EN 12429, EN12429
Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidi
15/11/1998
EN 1243, EN1243
Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates
15/02/1999
EN 12430, EN12430
Thermal insulating products for building applications. Determination of behaviour under point load
15/12/1998
EN 12431, EN12431
Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
15/12/1998
EN 12432, EN12432
Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods
15/12/1998
EN 12433-1, EN12433-1
Industrial, commercial, and garage doors and gates. Terminology. Types of doors
15/08/2000
EN 12433-2, EN12433-2
Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
15/08/2000
EN 12434, EN12434
Cryogenic vessels. Cryogenic flexible hoses
15/10/2000
EN 12436, EN12436
Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
28/01/2002
EN 12438, EN12438
Magnesium and magnesium alloys. Magnesium alloys for cast anodes
15/11/1998
EN 12439, EN12439
Sterile rectal catheters for single use
15/04/1999
EN 1244, EN1244
Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
15/07/1998
EN 12440, EN12440
Natural stone. Denomination criteria
15/01/2001
EN 12441-1, EN12441-1
Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method
23/01/2002
EN 12441-10, EN12441-10
Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
20/01/2005
EN 12441-2, EN12441-2
Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method
23/01/2002
EN 12441-3, EN12441-3
Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method
23/01/2002
EN 12441-4, EN12441-4
Zinc and zinc alloys. Chemical analysis. Determination of iron in zinc alloys. Spectrophotometric method
03/04/2003
EN 12441-5, EN12441-5
Zinc and zinc alloys. Chemical analysis. Determination of iron in primary zinc. Spectrophotometric method
03/04/2003
EN 12441-6, EN12441-6
Zinc and zinc alloys. Chemical analysis. Determination of aluminium and iron. Flame atomic absorption spectrometric method
02/04/2003
EN 12441-7, EN12441-7
Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
20/01/2005
EN 12441-8, EN12441-8
Zinc and zinc alloys. Chemical analysis. Detection of tin in secondary zinc. Flame atomic absorption spectrometric method
14/01/2005
EN 12441-9, EN12441-9
Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
14/01/2005
EN 12442-1, EN12442-1
Animal tissues and their derivatives utilized in the manufacture of medical devices. Analysis and management of risk
15/11/2000
EN 12442-2, EN12442-2
Animal tissues and their derivatives utilized in the manufacture of medical devices. Controls on sourcing, collection and handling
15/11/2000
EN 12442-3, EN12442-3
Animal tissues and their derivatives utilized in the manufacture of medical devices. Validation of the elimination and/or inactiva
15/11/2000
EN 12444, EN12444
Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
15/03/2001
EN 12445, EN12445
Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
15/01/2001
EN 12446, EN12446
Chimneys. Components. Concrete outer wall elements
24/04/2003
EN 12447, EN12447
Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
03/12/2001
EN 12449, EN12449
Copper and copper alloys. Seamless, round tubes for general purposes
15/11/1999


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE