EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 1015-1, EN1015-1 -

Standard
Title
Date
EN 1015-1, EN1015-1
Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
15/02/1999
EN 10151, EN10151
Stainless steel strip for springs. Technical delivery conditions
26/11/2002
EN 1015-10, EN1015-10
Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
15/11/1999
EN 1015-11, EN1015-11
Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
15/11/1999
EN 1015-12, EN1015-12
Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substra
15/06/2000
EN 1015-17, EN1015-17
Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
15/09/2000
EN 1015-18, EN1015-18
Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
20/12/2002
EN 1015-19, EN1015-19
Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
15/01/1999
EN 1015-2, EN1015-2
Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
15/02/1999
EN 10152, EN10152
Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
02/05/2003
EN 1015-21, EN1015-21
Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
20/12/2002
EN 1015-3, EN1015-3
Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
15/06/1999
EN 1015-4, EN1015-4
Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration)
15/02/1999
EN 1015-6, EN1015-6
Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
15/02/1999
EN 1015-7, EN1015-7
Methods of test for mortar for masonry. Determination of air content of fresh mortar
15/02/1999
EN 1015-9, EN1015-9
Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
15/11/1999
EN 10160, EN10160
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
15/11/1999
EN 10162, EN10162
Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
30/04/2003
EN 10163-1, EN10163-1
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. General requirements
16/12/2004
EN 10163-2, EN10163-2
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats
16/12/2004
EN 10163-3, EN10163-3
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections
16/12/2004
EN 10164, EN10164
Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
16/12/2004
EN 10165, EN10165
Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
15/07/1996
EN 10168, EN10168
Steel products. Inspection documents. List of information and description
24/06/2004
EN 10169-1, EN10169-1
Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test metho
05/02/2004
EN 10169-2, EN10169-2
Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
31/05/2006
EN 10169-3, EN10169-3
Continuously organic coated (coil coated) steel flat products. Products for building interior applications
27/06/2003
EN 1017, EN1017
Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
15/11/1998
EN 1018, EN1018
Chemicals used for treatment of water intended for human consumption. Calcium carbonate
15/11/1998
EN 10184, EN10184
Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotom
31/05/2006
EN 1019, EN1019
Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
15/04/1996
EN 1020, EN1020
Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a f
15/06/1998
EN 10200, EN10200
Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
01/05/1992
EN 10202, EN10202
Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
15/05/2001
EN 10204, EN10204
Metallic materials. Types of inspection documents
25/10/2004
EN 10205, EN10205
Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coat
28/02/1992
EN 10207, EN10207
Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
03/05/2005
EN 10208-1, EN10208-1
Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
15/04/1998
EN 10208-2, EN10208-2
Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
15/06/1997
EN 10209, EN10209
Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
15/07/1996
EN 10210-1, EN10210-1
Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
31/05/2006
EN 10210-2, EN10210-2
Hot finished structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
31/05/2006
EN 10211, EN10211
Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method
15/08/1996
EN 1021-1, EN1021-1
Furniture. Assessment of the ignitability of upholstered furniture. Ignition source smouldering cigarette
16/03/2006
EN 10212, EN10212
Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
15/02/1996
EN 1021-2, EN1021-2
Furniture. Assessment of the ignitability of upholstered furniture. Ignition source match flame equivalent
16/03/2006
EN 10213-1, EN10213-1
Technical delivery conditions for steel castings for pressure purposes. General
15/05/1996
EN 10213-2, EN10213-2
Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated t
15/05/1996
EN 10213-3, EN10213-3
Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
15/05/1996
EN 10213-4, EN10213-4
Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
15/05/1996
EN 10216-1, EN10216-1
Seamless steel tubes for pressure purposes. Technical delivery conditions
26/06/2002
EN 10216-2, EN10216-2
Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated
26/06/2002
EN 10216-3, EN10216-3
Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
26/06/2002
EN 10216-4, EN10216-4
Seamless steel tubes for pressure purposes. Technical delivery conditions
26/06/2002
EN 10216-5, EN10216-5
Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
07/09/2004
EN 10217-1, EN10217-1
Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature pro
26/06/2002
EN 10217-2, EN10217-2
Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy and alloy steel tubes with spec
26/06/2002
EN 10217-3, EN10217-3
Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
26/06/2002
EN 10217-4, EN10217-4
Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low
26/06/2002
EN 10217-5, EN10217-5
Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with
26/06/2002
EN 10217-6, EN10217-6
Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy steel tubes with specified
26/06/2002
EN 10217-7, EN10217-7
Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
25/02/2005
EN 10218-1, EN10218-1
Steel wire and wire products. General. Test methods
15/06/1994
EN 10218-2, EN10218-2
Steel wire and wire products. General. Wire dimensions and tolerances
15/01/1997
EN 10219-1, EN10219-1
Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
31/05/2006
EN 10219-2, EN10219-2
Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
31/05/2006
EN 1022, EN1022
Domestic furniture. Seating. Determination of stability
06/09/2005
EN 10220, EN10220
Seamless and welded steel tubes. Dimensions and masses per unit length
13/12/2002
EN 10221, EN10221
Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
15/06/1996
EN 10222-1, EN10222-1
Steel forgings for pressure purposes. General requirements for open die forgings
15/05/1998
EN 10222-2, EN10222-2
Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
15/04/2000
EN 10222-3, EN10222-3
Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
15/03/1999
EN 10222-4, EN10222-4
Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
15/03/1999
EN 10222-5, EN10222-5
Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
15/04/2000
EN 10223-1, EN10223-1
Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
15/04/1998
EN 10223-2, EN10223-2
Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
15/04/1998
EN 10223-3, EN10223-3
Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
15/04/1998
EN 10223-4, EN10223-4
Steel wire and wire products for fences. Steel wire welded mesh fencing
15/09/1998
EN 10223-5, EN10223-5
Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
15/09/1998
EN 10223-6, EN10223-6
Steel wire and wire products for fences. Steel wire chain link fencing
15/09/1998
EN 10223-7, EN10223-7
Steel wire and wire products for fences. Steel wire welded panels. For fencing
09/10/2002
EN 10224, EN10224
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
11/12/2002
EN 10225, EN10225
Weldable structural steels for fixed offshore structures. Technical delivery conditions
31/08/2001
EN 10226-1, EN10226-1
Pipe threads where pressure tight joints are made on the threads. Taper external threads and parallel internal threads. Dimensions
30/07/2004
EN 10226-2, EN10226-2
Pipe threads where pressure tight joints are made on the threads. Taper external threads and taper internal threads. Dimensions, t
16/01/2006
EN 10226-3, EN10226-3
Pipe threads where pressure-tight joints are made on the threads. Verification by means of limit gauges
30/09/2005
EN 10228-1, EN10228-1
Non-destructive testing of steel forgings. Magnetic particle inspection
15/07/1999
EN 10228-2, EN10228-2
Non-destructive testing of steel forgings. Penetrant testing
15/09/1998
EN 10228-3, EN10228-3
Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
15/09/1998
EN 10228-4, EN10228-4
Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
15/12/1999
EN 10229, EN10229
Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
15/07/1998
EN 10230-1, EN10230-1
Steel wire nails. Loose nails for general applications
15/01/2000
EN 1023-1, EN1023-1
Office furniture. Screens. Dimensions
15/01/1997
EN 1023-2, EN1023-2
Office furniture. Screens. Mechanical safety requirements
15/08/2000
EN 1023-3, EN1023-3
Office furniture. Screens. Test methods
15/08/2000
EN 10238, EN10238
Automatically blast cleaned and automatically primed structural steel products
15/05/1997
EN 1024, EN1024
Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
15/08/1997
EN 10240, EN10240
Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic p
15/04/1998
EN 10241, EN10241
Steel threaded pipe fittings
15/07/2000
EN 10242, EN10242
Threaded pipe fittings in malleable cast iron
15/09/1995
EN 10243-1, EN10243-1
Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
15/12/1999
EN 10243-2, EN10243-2
Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
15/12/1999
EN 10244-1, EN10244-1
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
15/05/2001
EN 10244-2, EN10244-2
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
15/05/2001
EN 10244-3, EN10244-3
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
15/05/2001
EN 10244-4, EN10244-4
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
15/05/2001
EN 10244-5, EN10244-5
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
15/05/2001
EN 10244-6, EN10244-6
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
15/05/2001
EN 10245-1, EN10245-1
Steel wire and wire products. Organic coatings on steel wire. General rules
15/05/2001
EN 10245-2, EN10245-2
Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
15/05/2001
EN 10245-3, EN10245-3
Steel wire and wire products. Organic coatings on steel wire. PE coated wire
15/05/2001
EN 10245-4, EN10245-4
Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
30/04/2003
EN 10246-1, EN10246-1
Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) fer
15/07/1996
EN 10246-10, EN10246-10
Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the d
15/07/2000
EN 10246-11, EN10246-11
Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface i
15/06/2000
EN 10246-12, EN10246-12
Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the dete
15/06/2000
EN 10246-13, EN10246-13
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic thickness testing for seamless and welded (except sub
15/06/2000
EN 10246-14, EN10246-14
Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tu
15/02/2000
EN 10246-15, EN10246-15
Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes
15/06/2000
EN 10246-16, EN10246-16
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes f
15/06/2000
EN 10246-17, EN10246-17
Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of la
15/06/2000
EN 10246-18, EN10246-18
Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes
15/06/2000
EN 10246-2, EN10246-2
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc welded) austen
15/06/2000
EN 10246-3, EN10246-3
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel
15/02/2000
EN 10246-4, EN10246-4
Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnet
15/02/2000


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE