|
Title |
Date |
|
EN 2004-1, EN2004-1 |
Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys |
15/09/1993 |
EN 2004-5, EN2004-5 |
Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-fin |
15/10/1993 |
EN 2009, EN2009 |
Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads |
15/07/1992 |
EN 20-1, EN20-1 |
Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by surface |
15/09/1992 |
EN 201, EN201 |
Rubber and plastics machines. Injection moulding machines. Safety requirements |
15/07/1997 |
EN 20105-A02 Colour Scale, EN20105-A02 Colour Scale |
Textiles. Tests for colour fastness. Grey scale for assessing change in colour (including half-steps) |
15/07/1990 |
EN 20105-A02, EN20105-A02 |
Textiles. Tests for colour fastness. Grey scale for assessing change in colour |
15/01/1995 |
EN 20105-A03 Colour Scale, EN20105-A03 Colour Scale |
Textiles. Tests for colour fastness. Grey scale for assessing staining (including half-steps) |
15/12/1961 |
EN 20105-A03, EN20105-A03 |
Textiles. Tests for colour fastness. Grey scale for assessing staining |
15/01/1995 |
EN 20105-C01, EN20105-C01 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 1 |
15/01/1993 |
EN 20105-C02, EN20105-C02 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 2 |
15/01/1993 |
EN 20105-C03, EN20105-C03 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 3 |
15/01/1993 |
EN 20105-C04, EN20105-C04 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 4 |
15/01/1993 |
EN 20105-C05, EN20105-C05 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 5 |
15/01/1993 |
EN 20105-N01, EN20105-N01 |
Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite |
15/06/1995 |
EN 2011, EN2011 |
Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. |
29/09/1989 |
EN 2012, EN2012 |
Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loa |
29/09/1989 |
EN 2014, EN2014 |
Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. |
31/10/1989 |
EN 20140-10, EN20140-10 |
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulat |
15/10/1992 |
EN 20140-2, EN20140-2 |
Determination, verification and application of precision data |
15/05/1993 |
EN 2015, EN2015 |
Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and l |
29/09/1989 |
EN 2017, EN2017 |
Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series |
29/09/1989 |
EN 2018, EN2018 |
Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensio |
29/09/1989 |
EN 20187, EN20187 |
Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and condition |
15/12/1993 |
EN 20-2, EN20-2 |
Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by impregn |
15/06/1993 |
EN 2020, EN2020 |
Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter serie |
29/09/1989 |
EN 2022, EN2022 |
Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and |
28/09/1990 |
EN 20225, EN20225 |
Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions |
01/04/1992 |
EN 2023, EN2023 |
Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner. Normal series. Dimensions a |
29/09/1989 |
EN 20273, EN20273 |
Fasteners. Clearance holes for bolts and screws |
01/04/1992 |
EN 20286-1, EN20286-1 |
ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits |
31/01/1990 |
EN 20286-2, EN20286-2 |
ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes a |
31/01/1990 |
EN 20287, EN20287 |
Paper and board. Determination of moisture content. Oven-drying method |
30/06/1986 |
EN 203-1, EN203-1 |
Gas heated catering equipment. General safety rules |
27/09/2005 |
EN 203-2, EN203-2 |
Specification for gas heated catering equipment. Rational use of energy |
15/04/1995 |
EN 2032-1, EN2032-1 |
Metallic materials. Conventional designation |
07/01/2002 |
EN 203-2-1, EN203-2-1 |
Gas heated catering equipment. Specific requirements. Open burners and wok burners |
25/11/2005 |
EN 2032-2, EN2032-2 |
Metallic materials. Coding of metallurgical condition in delivery condition |
15/06/1994 |
EN 203-2-3, EN203-2-3 |
Gas heated catering equipment. Specific requirements. Boiling pans |
25/11/2005 |
EN 203-2-4, EN203-2-4 |
Gas heated catering equipment. Specific requirements. Fryers |
25/11/2005 |
EN 203-2-6, EN203-2-6 |
Gas heated catering equipment. Specific requirements. Hot water heaters for beverage |
25/11/2005 |
EN 203-2-8, EN203-2-8 |
Gas heated catering equipment. Specific requirements. Brat pans and paella cookers |
25/11/2005 |
EN 203-2-9, EN203-2-9 |
Gas heated catering equipment. Specific requirements. Solid tops, warming plates and griddles |
25/11/2005 |
EN 204, EN204 |
Classification of thermoplastic wood adhesives for non-structural applications |
15/07/2001 |
EN 2044, EN2044 |
Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm $3L D $3L 63 mm. Dimen |
24/12/2001 |
EN 2045, EN2045 |
Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm $3L a $3L 50 mm. Dim |
24/12/2001 |
EN 2046, EN2046 |
Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm $3L a $3L 50 mm. Dimension |
24/12/2001 |
EN 2047, EN2047 |
Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions |
15/07/2001 |
EN 2048, EN2048 |
Aerospace series. Extruded L-section in aluminium alloys. Dimensions |
15/07/2001 |
EN 2049, EN2049 |
Aerospace series. Extruded channel section, in aluminium alloys. Dimensions |
15/07/2001 |
EN 205, EN205 |
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
03/04/2003 |
EN 2050, EN2050 |
Aerospace series. Extruded T-section, in aluminium alloys. Dimensions |
15/07/2001 |
EN 20535, EN20535 |
Paper and board. Determination of water absorptiveness. Cobb method |
31/10/1991 |
EN 20594-1, EN20594-1 |
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. General requirements |
30/01/1987 |
EN 206-1, EN206-1 |
Concrete. Specification, performance, production and conformity |
15/02/2001 |
EN 2063, EN2063 |
Airframe rolling bearings. Technical specification |
15/08/1992 |
EN 20638, EN20638 |
Method for determination of dry-matter content of pulps |
29/02/1980 |
EN 2064, EN2064 |
Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification |
15/08/1992 |
EN 2066, EN2066 |
Aerospace series. Extruded section in aluminium alloys. General tolerances |
07/01/2002 |
EN 2067, EN2067 |
Rod ends with self-aligning ball bearings. Technical specification |
15/06/1996 |
EN 2068, EN2068 |
Rod ends with self-lubricating self-aligning bearings. Technical specification |
15/06/1996 |
EN 20693, EN20693 |
Dimensions of seam welding wheel blanks |
31/01/1992 |
EN 207, EN207 |
Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors) |
15/03/1999 |
EN 2070-1, EN2070-1 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements |
31/07/1991 |
EN 2070-2, EN2070-2 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate |
31/07/1991 |
EN 2070-3, EN2070-3 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section |
28/06/1991 |
EN 2070-4, EN2070-4 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures |
31/01/1991 |
EN 2070-5, EN2070-5 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure |
31/01/1991 |
EN 2070-6, EN2070-6 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire |
31/01/1991 |
EN 2070-7, EN2070-7 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock |
31/01/1991 |
EN 2071, EN2071 |
Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm $3L a $3L 6 mm. Dimensions |
07/01/2002 |
EN 2072, EN2072 |
Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm <= a <= 6 mm |
17/11/2005 |
EN 2076-1, EN2076-1 |
Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements |
31/01/1991 |
EN 2076-2, EN2076-2 |
Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting |
31/01/1991 |
EN 2076-3, EN2076-3 |
Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings |
31/01/1991 |
EN 2078, EN2078 |
Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general |
09/01/2002 |
EN 2079, EN2079 |
Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads |
15/04/1995 |
EN 208, EN208 |
Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
15/03/1999 |
EN 20811, EN20811 |
Textiles. Determination of resistance to water penetration. Hydrostatic pressure test |
31/03/1982 |
EN 2082-1, EN2082-1 |
Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements |
31/01/1991 |
EN 2082-2, EN2082-2 |
Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock |
31/01/1991 |
EN 2082-3, EN2082-3 |
Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings |
31/01/1991 |
EN 2083, EN2083 |
Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
15/07/2001 |
EN 2084, EN2084 |
Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specificati |
22/02/2006 |
EN 2085, EN2085 |
Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a $3L 150 mm |
12/01/2005 |
EN 2086, EN2086 |
Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a $3L 150 mm |
12/01/2005 |
EN 20865, EN20865 |
Slots in platens for projection welding machines |
31/01/1992 |
EN 2087, EN2087 |
Aerospace series. Aluminium alloy AL-P2014A. T6 or T62. Clad sheet & strip 0,4 mm <= a <= 6 mm |
18/11/2005 |
EN 2088, EN2088 |
Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm <= a <= 6 mm |
12/12/2005 |
EN 2089, EN2089 |
Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm $3L a $3L 6 mm |
04/10/2005 |
EN 20898-2, EN20898-2 |
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread |
15/06/1994 |
EN 20898-7, EN20898-7 |
Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
15/07/1995 |
EN 209, EN209 |
Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l |
15/03/2000 |
EN 2090, EN2090 |
Aluminium alloy AL-P2024-T3. Clad sheet and strip. 0,3 mm $3L a $3L 6 mm |
04/10/2005 |
EN 2092, EN2092 |
Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm <=a <=6 mm |
13/10/2005 |
EN 2093, EN2093 |
Aluminium alloy AL-P7009-T74. Hand forgings 20 mm $3L a $3L 150 mm |
15/11/1992 |
EN 2094, EN2094 |
Aluminium alloy AL-P7009-T74. Die forgings 3 mm $3L a $3L 150 mm |
15/11/1992 |
EN 210, EN210 |
Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l |
15/03/2000 |
EN 2100, EN2100 |
Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D $3L 200 mm |
15/11/1992 |
EN 2101, EN2101 |
Specification for chromic acid anodizing of aluminium and wrought aluminium alloys |
29/11/1991 |
EN 2103-1, EN2103-1 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements |
31/01/1992 |
EN 2103-2, EN2103-2 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Remelting stock |
31/01/1992 |
EN 2103-3, EN2103-3 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Pre-production and production cast |
31/01/1992 |
EN 2104, EN2104 |
Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD |
15/06/1996 |
EN 21089, EN21089 |
Electrode taper fits for spot welding equipment. Dimensions |
28/02/1992 |
EN 212, EN212 |
Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
03/10/2003 |
EN 2122, EN2122 |
Washers, flat, in aluminium alloy, anodized or chromated |
15/06/1996 |
EN 2126, EN2126 |
Aluminium alloy AL-P7075-T651. Plate 6 mm $0L a $3L 80 mm |
15/11/1992 |
EN 2127, EN2127 |
Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D $3L 100 mm |
15/11/1992 |
EN 2128, EN2128 |
Aluminium alloy AL-P7075-T7351. Drawn bars 6 mm $3L a or D $3L 75 mm |
15/11/1992 |
EN 2130, EN2130 |
Aerospace Series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification |
12/11/2001 |
EN 2131, EN2131 |
Aerospace series. Plates in aluminium alloys. Thickness 6 mm $0L a $3L 160 mm. Dimensions |
07/01/2002 |
EN 2133, EN2133 |
Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys |
15/03/1998 |
EN 2134, EN2134 |
Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm $3L D $3L 220 mm. Dimensions |
04/01/2002 |
EN 2138, EN2138 |
Washers, flat, in steel, cadmium plated |
15/03/2000 |
EN 2139, EN2139 |
Specification for washers, flat heat resisting steel |
29/06/1990 |
EN 2143, EN2143 |
Rivets, solid, universal head, in aluminium 1050A, inch based series |
15/02/1993 |
EN 2144, EN2144 |
Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
15/12/1994 |
EN 2145, EN2145 |
Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
15/11/1994 |
EN 2146, EN2146 |
Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
15/02/1993 |
EN 2148, EN2148 |
Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
15/02/1993 |
EN 2149, EN2149 |
Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
15/09/1996 |
EN 215, EN215 |
Thermostatic radiator valves. Requirements and test methods |
25/06/2004 |
EN 2155-12, EN2155-12 |
Specification for test methods for transparent materials for aircraft glazing. Determination of linear thermal expansion |
15/11/1997 |
EN 2155-13, EN2155-13 |
Test methods for transparent materials for aircraft glazing. Determination of temperature at deflection under load |
15/04/1993 |
