|
Title |
Date |
|
EN 23878, EN23878 |
Hardmetals. Vickers hardness test |
15/06/1993 |
EN 23907, EN23907 |
Hardmetals. Determination of total carbon content. Gravimetric method |
15/06/1993 |
EN 23908, EN23908 |
Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method |
15/06/1993 |
EN 23909, EN23909 |
Hardmetals. Determination of cobalt. Potentiometric method |
15/01/1994 |
EN 23923-1, EN23923-1 |
Metallic powders. Determination of apparent density. Funnel method |
15/06/1993 |
EN 23923-2, EN23923-2 |
Metallic powders. Determination of apparent density. Scott volumeter method |
15/06/1993 |
EN 2395, EN2395 |
Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm <=a <=6 mm |
13/10/2005 |
EN 23954, EN23954 |
Powders for powder metallurgical purposes. Sampling |
15/06/1993 |
EN 23995, EN23995 |
Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts |
15/06/1993 |
EN 24003, EN24003 |
Permeable sintered metal materials. Determination of bubble test pore size |
15/06/1993 |
EN 24006, EN24006 |
Measurement of fluid flow in closed conduits. Vocabulary and symbols |
31/10/1991 |
EN 24015, EN24015 |
Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter) |
01/04/1992 |
EN 241, EN241 |
Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spec |
15/08/2000 |
EN 2413, EN2413 |
Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 |
15/09/1995 |
EN 24178, EN24178 |
Specification for information to be recorded in distribution trials involving complete, filled transport packages |
31/03/1981 |
EN 24180-1, EN24180-1 |
Guide to compilation of performance test schedules for complete, filled transport packages. General principles |
30/01/1981 |
EN 24180-2, EN24180-2 |
Guide to compilation of performance test schedules for complete, filled transport packages. Quantitative data |
30/01/1981 |
EN 24185, EN24185 |
Measurement of fluid flow in closed conduits. Weighing method |
31/12/1981 |
EN 2422, EN2422 |
Aluminium alloy AL-P2124-T351. Plate. 25 mm $0L a $3L 120 mm |
04/10/2005 |
EN 2424, EN2424 |
Marking of aerospace products |
15/09/1995 |
EN 24260, EN24260 |
Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold com |
30/09/1994 |
EN 2428, EN2428 |
Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD |
15/11/1995 |
EN 2429, EN2429 |
Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD |
15/11/1995 |
EN 2430, EN2430 |
Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD |
15/11/1995 |
EN 2431, EN2431 |
Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD |
15/11/1995 |
EN 2432, EN2432 |
Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD |
15/11/1995 |
EN 2437, EN2437 |
Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
04/01/2002 |
EN 24489, EN24489 |
Sintered hardmetals. Sampling and testing |
15/06/1993 |
EN 24491-1, EN24491-1 |
Metallic powders. Determination of oxygen content by reduction methods. General guidelines |
15/06/1993 |
EN 24491-4, EN24491-4 |
Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction |
15/06/1993 |
EN 24492, EN24492 |
Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering |
15/06/1993 |
EN 24496, EN24496 |
Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders |
15/06/1993 |
EN 24497, EN24497 |
Metallic powders. Determination of particle size by dry sieving |
15/06/1993 |
EN 24498-1, EN24498-1 |
Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardne |
15/06/1993 |
EN 24499, EN24499 |
Specification for hardmetals. Metallographic determination of microstructure |
15/06/1993 |
EN 24501, EN24501 |
Hardmetals. Determination of titanium. Photometric peroxide method |
15/01/1994 |
EN 24503, EN24503 |
Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method |
15/06/1993 |
EN 24505, EN24505 |
Specification for hardmetals. Metallographic determination of porosity and uncombined carbon |
15/06/1993 |
EN 24506, EN24506 |
Specification for hardmetals. Compression test |
15/06/1993 |
EN 246, EN246 |
Sanitary tapware. General specifications for flow rate regulators |
03/09/2003 |
EN 24641, EN24641 |
Rubber hoses for water suction and discharge. Specification |
15/07/1993 |
EN 247, EN247 |
Heat exchangers. Terminology |
15/09/1997 |
EN 24766, EN24766 |
Slotted set screws with flat point |
15/10/1992 |
EN 248, EN248 |
Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr |
29/01/2003 |
EN 2484, EN2484 |
Specification for microfilming of drawings. Aperture card for 35 mm microfilm |
31/10/1989 |
EN 2486, EN2486 |
Aerospace series. Aluminium alloy AL-P2618A. Forging stock |
25/11/2005 |
EN 24869-1, EN24869-1 |
Acoustics. Hearing protectors. Sound attenuation of hearing protectors. Subjective method of measurement |
28/06/1991 |
EN 24869-3, EN24869-3 |
Acoustics. Hearing protectors. Simplified method for the measurement of insertion loss of ear-muff type protectors for quality ins |
15/02/1994 |
EN 24883, EN24883 |
Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method |
15/06/1993 |
EN 24884, EN24884 |
Hardmetals. Sampling and testing of powders using sintered test pieces |
15/06/1993 |
EN 2489, EN2489 |
Fibre reinforced plastics. Determination of the action of test fluids |
15/12/1995 |
EN 2491, EN2491 |
Molybdenum disulphide dry lubricants. Coating methods |
15/08/1997 |
EN 24920, EN24920 |
Textiles. Determination of resistance to surface wetting (spray test) of fabrics |
26/02/1982 |
EN 24937, EN24937 |
Steel and iron. Determination of chromium content. Potentiometric or visual titration method |
31/01/1991 |
EN 2495, EN2495 |
Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard |
31/05/1991 |
EN 2497, EN2497 |
Specification for dry abrasive blasting of titanium and titanium alloys |
28/09/1990 |
EN 2498, EN2498 |
Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and |
31/12/1990 |
EN 2499, EN2499 |
Specification for computer output microfiche (com) A6 microfiche |
28/09/1990 |
EN 250, EN250 |
Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking |
15/04/2000 |
EN 2501, EN2501 |
Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads |
15/06/1992 |
EN 25077, EN25077 |
Textiles. Determination of dimensional change in washing and drying |
15/02/1994 |
EN 251, EN251 |
Shower trays. Connecting dimensions |
11/08/2003 |
EN 2511, EN2511 |
Aluminium alloy AL-P7075-T7351. Plate. 6 mm $0L a $3L 100 mm |
04/10/2005 |
EN 2515, EN2515 |
Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads |
31/12/1990 |
EN 2516, EN2516 |
Passivation of corrosion resisting steels and decontamination of nickel base alloys |
15/07/1997 |
EN 25184, EN25184 |
Straight resistance spot welding electrodes |
15/05/1995 |
EN 25264-3, EN25264-3 |
Pulps. Laboratory beating. Jokro mill method |
15/10/1994 |
EN 253, EN253 |
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pi |
27/02/2003 |
EN 2536, EN2536 |
Hard anodizing of aluminium alloys |
15/10/1995 |
EN 2544, EN2544 |
Specification for representation of rivets on drawings for aerospace equipment |
28/09/1990 |
EN 2545-1, EN2545-1 |
Titanium and titanium alloy remelting stock and castings. Technical specification. General requirements |
15/10/1995 |
EN 2545-2, EN2545-2 |
Titanium and titanium alloy remeling stock and castings. Technical specification. Remelting stock |
15/11/1995 |
EN 2545-3, EN2545-3 |
Titanium and titanium alloy remelting stock and castings. Technical specification. Pre-production and production castings |
15/12/1995 |
EN 2546, EN2546 |
Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions |
30/06/2006 |
EN 2547, EN2547 |
Specification for filming of documents. Microfilm 105 mm (Microfiche A6) |
31/10/1989 |
EN 2549, EN2549 |
Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS$d2 lubricat |
30/06/2006 |
EN 2550, EN2550 |
Rivets, solid 100$0D normal countersunk head, in aluminium 1050A, inch based series |
15/02/1993 |
EN 2551, EN2551 |
Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, inch based series |
15/02/1993 |
EN 2552, EN2552 |
Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
15/02/1993 |
EN 2553, EN2553 |
Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2017A, inch based series |
15/02/1993 |
EN 255-3, EN255-3 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Testing and requirem |
15/09/1997 |
EN 2555, EN2555 |
Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, inch based series |
15/02/1993 |
EN 2556, EN2556 |
Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
15/02/1993 |
EN 2557, EN2557 |
Carbon fibre preimpregnates. Determination of mass per unit area |
15/08/1997 |
EN 2558, EN2558 |
Carbon fibre preimpregnates. Determination of the volatile content |
15/06/1997 |
EN 25580, EN25580 |
Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing |
15/06/1992 |
EN 2559, EN2559 |
Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area |
15/08/1997 |
EN 2560, EN2560 |
Carbon fibre preimpregnates. Determination of the resin flow |
15/10/1998 |
EN 2561, EN2561 |
Carbon fibre reinforced plastics. Undirectional laminates. Tensile test parallel to the fibre direction |
15/12/1995 |
EN 2562, EN2562 |
Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction |
15/08/1997 |
EN 2563, EN2563 |
Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength |
15/06/1997 |
EN 2564, EN2564 |
Carbon fibre laminates. Determination of the fibre, resin and void contents |
15/09/1998 |
EN 25663, EN25663 |
Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium |
15/11/1993 |
EN 25667-1, EN25667-1 |
Water quality. Sampling. Guidance on the design of sampling programmes |
30/04/1981 |
EN 25667-2, EN25667-2 |
Water quality. Sampling. Guidance on sampling techniques |
20/12/1991 |
EN 2569, EN2569 |
Control cable fittings and turnbarrels. Technical specification |
30/09/1991 |
EN 257, EN257 |
Mechanical thermostats for gas-burning appliances |
01/05/1992 |
EN 2570, EN2570 |
Nickel-cadmium batteries. Technical specification |
15/11/1996 |
EN 2574, EN2574 |
Specification for welds. Information on drawings |
31/12/1990 |
EN 2575, EN2575 |
Specification for filming of documents. 16 mm microfilm |
30/11/1989 |
EN 25754, EN25754 |
Sintered metal materials, excluding hardmetals. Unnotched impact test piece |
15/06/1993 |
EN 25813, EN25813 |
Water quality. Determination of dissolved oxygen. Iodometric method |
31/12/1984 |
EN 25814, EN25814 |
Method for determination of dissolved oxygen in water: electrochemical probe method |
15/12/1992 |
EN 25821, EN25821 |
Resistance spot welding electrode caps |
28/02/1992 |
EN 25822, EN25822 |
Spot welding equipment. Taper plug gauges and taper ring gauges |
28/02/1992 |
EN 25827, EN25827 |
Specification for spot welding. Electrode back-ups and clamps |
15/07/1992 |
EN 2583, EN2583 |
Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/ |
15/06/1997 |
EN 2584, EN2584 |
Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load |
13/11/2001 |
EN 2585, EN2585 |
Aerospace series. Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner. Elevated load at ambient tem |
09/11/2001 |
EN 2586, EN2586 |
Specification for washers, lock for flight control rods. Dimensions |
28/06/1991 |
EN 2587, EN2587 |
Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads |
31/12/1990 |
EN 2588, EN2588 |
Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads |
30/06/2006 |
EN 2591, EN2591 |
Elements of electrical and optical connection. Test methods. General |
15/12/1992 |
EN 259-1, EN259-1 |
Wallcoverings in roll form. Heavy duty wallcoverings. Specifications |
15/06/2001 |
EN 2591-100, EN2591-100 |
Aerospace series. Elements of electrical and optical connection. Test methods. General |
10/02/2006 |
EN 2591-101, EN2591-101 |
Elements of electrical and optical connection. Test methods. Visual examination |
15/11/1994 |
EN 2591-102, EN2591-102 |
Elements of electrical and optical connection. Test methods. Examination of dimensions and mass |
15/07/1996 |
EN 2591-201, EN2591-201 |
Elements of electrical and optical connection. Test methods. Contact resistance. Low level |
15/06/1996 |
EN 2591-202, EN2591-202 |
Elements of electrical and optical connection. Test methods. Contact resistance at rated current |
15/06/1996 |
EN 2591-203, EN2591-203 |
Elements of electrical and optical connection. Test methods. Electrical continuity at microvolt level |
15/06/1996 |
EN 2591-204, EN2591-204 |
Elements of electrical and optical connection. Test methods. Discontinuity of contacts in the microsecond range |
15/06/1996 |
EN 2591-205, EN2591-205 |
Elements of electrical and optical connection. Test methods. Housing (shell) electrical continuity |
15/06/1996 |
EN 2591-206, EN2591-206 |
Elements of electrical and optical connection. Test methods. Measurements of insulation resistance |
15/07/1996 |
EN 2591-207, EN2591-207 |
Elements of electrical and optical connection. Test methods. Voltage proof test |
15/06/1996 |
EN 2591-208, EN2591-208 |
Elements of electrical and optical connection. Test methods. Temperature rise due to rated current |
15/06/1996 |
