 |
|
|
EN STANDARDS: EN 25923, EN25923 -
|
Title |
Date |
|
EN 25923, EN25923 |
Fire extinguishing media. Carbon dioxide |
31/10/1990 |
EN 2596, EN2596 |
Specification for washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated. Dimensions |
28/09/1990 |
EN 2597, EN2597 |
Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction |
15/09/1998 |
EN 25978, EN25978 |
Rubber- or plastics-coated fabrics. Determination of blocking resistance |
15/11/1993 |
EN 2599, EN2599 |
Aerospace series. Strips in aluminium and aluminium alloys. Thickness 0,25 mm $3L a $3L 3.2 mm. Dimensions |
15/07/2001 |
EN 26, EN26 |
Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
15/09/1998 |
EN 2601, EN2601 |
Fork ends, adjustable. Technical specification |
15/12/1996 |
EN 2602, EN2602 |
Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration |
30/06/2006 |
EN 2603, EN2603 |
Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration |
30/06/2006 |
EN 2604, EN2604 |
Aerospace series. 8$0D 30' interface for adaptors, threaded, with lockring. Geometric configuration |
30/06/2006 |
EN 2605, EN2605 |
Aerospace series. 24$0D interface for adaptors, threaded, with lockring. Geometric configuration |
30/06/2006 |
EN 2607, EN2607 |
Aerospace series. O-rings for adaptors, threaded, with lockring. Survey |
24/01/2006 |
EN 2608, EN2608 |
Aerospace series. Installation and removal requirements for 8$0D 30' adaptors, threaded, with lockring |
28/04/2006 |
EN 2609, EN2609 |
Specification for turnbarrels, control cable in copper-zinc alloys. Dimensions and loads |
31/10/1989 |
EN 26098, EN26098 |
Information processing. Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape |
15/07/1992 |
EN 26157-1, EN26157-1 |
Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements |
01/05/1992 |
EN 26157-3, EN26157-3 |
Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements |
01/04/1992 |
EN 2617, EN2617 |
Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm $0L a $3L 100 mm. Dimensions |
23/10/2001 |
EN 2622, EN2622 |
Aerospace Series. Circular tubes, for fluids in heat resisting alloys. Diameter 3,2 mm $3L D $3L 100 mm. Dimensions |
22/10/2001 |
EN 263, EN263 |
Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
03/07/2002 |
EN 2630, EN2630 |
Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D $3L 125 mm with peripheral coarse grain control |
15/02/1994 |
EN 2632, EN2632 |
Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D <= 150 mm with peripheral coarse grain control |
07/12/2005 |
EN 2633, EN2633 |
Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm with peripheral coarse grain control |
15/02/1994 |
EN 2635, EN2635 |
Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D <= 200 mm with peripheral coarse grain contro |
18/11/2005 |
EN 2636, EN2636 |
Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D $3L 200 mm with peripheral coarse grain control |
15/02/1994 |
EN 264, EN264 |
Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels |
30/09/1991 |
EN 2641, EN2641 |
Specification for control cable assemblies. Combinations and dimensions |
31/10/1989 |
EN 2644, EN2644 |
Rod assemblies for flight controls. Technical specification |
15/07/1998 |
EN 2645, EN2645 |
Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions |
28/04/2006 |
EN 26461-1, EN26461-1 |
Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes ($7IClostridia$7R). Method by enrichment in a |
15/04/1993 |
EN 26461-2, EN26461-2 |
Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes ($7IClostridia$7R). Method by membrane filtra |
15/04/1993 |
EN 2647, EN2647 |
Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification: 900 MPa (at ambient t |
15/09/1995 |
EN 2648, EN2648 |
Washers, concave, in alloy steel, cadmium plated |
15/09/1995 |
EN 2649, EN2649 |
Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235$ |
15/09/1995 |
EN 2650, EN2650 |
Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient tempera |
15/01/1997 |
EN 26501, EN26501 |
Ferronickel. Specification and delivery requirements |
15/07/1992 |
EN 2651, EN2651 |
Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80$0DC |
15/03/1997 |
EN 2652, EN2652 |
Screws, 100$0D countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at amb |
15/06/1997 |
EN 2653, EN2653 |
Screws, 100$0D countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 M |
15/01/1997 |
EN 2654, EN2654 |
Screws, 100$0D countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient tempe |
15/03/1997 |
EN 26553, EN26553 |
Specification for marking of automatic steam traps |
29/11/1991 |
EN 26554, EN26554 |
Specification for face-to-face dimensions for flanged automatic steam traps |
29/11/1991 |
EN 2656, EN2656 |
Aerospace series. Pipe coupling. Coupling end, welded. Geometric configuration |
15/10/2001 |
EN 26590-1, EN26590-1 |
Packaging. Sacks. Vocabulary and types. Paper sacks |
15/03/1993 |
EN 26590-2, EN26590-2 |
Packaging. Sacks. Vocabulary and types. Sacks made from thermoplastic flexible film |
15/03/1993 |
EN 26591-1, EN26591-1 |
Packaging. Sacks. Description and method of measurement. Empty paper sacks |
15/03/1993 |
EN 26591-2, EN26591-2 |
Packaging. Sacks. Description and method of measurement. Empty sacks made from thermoplastic flexible film |
15/03/1993 |
EN 26595, EN26595 |
Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method |
29/04/1983 |
EN 26599-1, EN26599-1 |
Packaging. Sacks. Conditioning for testing. Paper sacks |
15/02/1993 |
EN 266, EN266 |
Specification for textile wallcoverings |
28/02/1992 |
EN 2665-001, EN2665-001 |
Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification |
15/09/1999 |
EN 2665-003, EN2665-003 |
Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard |
15/08/1999 |
EN 2665-004, EN2665-004 |
Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard |
15/08/1999 |
EN 2667-6, EN2667-6 |
Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methods. Determination of water absorption |
26/07/2002 |
EN 267, EN267 |
Forced draught oil burners. Definitions, requirements, testing, marking |
15/12/1999 |
EN 26704, EN26704 |
Classification of automatic steam traps |
29/11/1991 |
EN 26777, EN26777 |
Water quality. Physical, chemical and biochemical methods. Determination of nitrite: molecular absorption spectrometric method |
31/12/1984 |
EN 268, EN268 |
Specification for propellants for commercial ammunition. Requirements and test methods |
30/08/1991 |
EN 2680, EN2680 |
Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS$d2 lubricated. |
30/06/2006 |
EN 26801, EN26801 |
Rubber or plastics hoses. Determination of volumetric expansion |
30/09/1985 |
EN 26802, EN26802 |
Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing |
31/07/1991 |
EN 2681, EN2681 |
Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a $3L 150 mm |
12/01/2005 |
EN 2684, EN2684 |
Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm $0L a $3L 140 mm |
13/01/2005 |
EN 2687, EN2687 |
Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm $0L a $3L 160 mm |
13/01/2005 |
EN 26891, EN26891 |
Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation cha |
31/07/1991 |
EN 269, EN269 |
Respiratory protective devices. Specification for powered fresh air hose breathing apparatus incorporating a hood |
15/01/1995 |
EN 26922, EN26922 |
Adhesives. Determination of tensile strength of butt joints |
31/05/1989 |
EN 26927, EN26927 |
Building construction. Jointing products. Sealants. Vocabulary |
30/08/1991 |
EN 2693, EN2693 |
Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm <=a <=6 mm |
13/10/2005 |
EN 2694, EN2694 |
Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm $3L a $3L 6 mm |
13/10/2005 |
EN 26948, EN26948 |
Specification for production and performance characteristic tests for automatic steam traps |
29/11/1991 |
EN 2695, EN2695 |
Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm <=a <=6 mm |
13/10/2005 |
EN 2696, EN2696 |
Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm <=a <=6 mm |
13/10/2005 |
EN 2702, EN2702 |
Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D <= 200 mm |
18/11/2005 |
EN 27023, EN27023 |
Packaging. Sacks. Method of sampling empty sacks for testing |
15/02/1993 |
EN 2703, EN2703 |
Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm $3L a $3L 6 mm |
04/10/2005 |
EN 2713-003, EN2713-003 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 200 $0D |
31/05/2006 |
EN 2713-007, EN2713-007 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 200$0DC |
31/05/2006 |
EN 2714-002, EN2714-002 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 2714-003, EN2714-003 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 2714-007, EN2714-007 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 2714-011, EN2714-011 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 2714-012, EN2714-012 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 2714-013, EN2714-013 |
Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC |
10/02/2006 |
EN 27201-1, EN27201-1 |
Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Specifications for halon 1211 and halon 1301 |
31/10/1990 |
EN 27201-2, EN27201-2 |
Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Code of practice for safe handling and transfer procedures |
15/08/1994 |
EN 27213, EN27213 |
Method for sampling pulps for testing |
30/07/1982 |
EN 27243, EN27243 |
Hot environments. Estimation of the heat stress on working man, based on the $7IWBGT$7R-index (wet bulb globe temperature) |
15/01/1994 |
EN 27286, EN27286 |
Graphical symbols for resistance welding equipment |
28/02/1992 |
EN 273, EN273 |
Wood preservatives. Determination of the curative action against $7ILyctus brunneus$7R (Stephens) (Laboratory method) |
15/09/1992 |
EN 2731, EN2731 |
Aerospace series. Magnesium alloy MG-C46001. T6. Sand casting |
13/12/2005 |
EN 2732, EN2732 |
Magnesium alloy MG-C46001-T6. Chill casting |
04/10/2005 |
EN 27326, EN27326 |
Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
31/07/1991 |
EN 274-1, EN274-1 |
Waste fittings for sanitary appliances. Requirements |
04/09/2002 |
EN 274-2, EN274-2 |
Waste fitting for sanitary appliances. Test methods |
04/09/2002 |
EN 2743, EN2743 |
Aerospace series. Fibre reinforced plastics. Standard procedures for conditioning prior to testing unaged materials |
11/01/2002 |
EN 274-3, EN274-3 |
Waste fittings for sanitary appliances. Quality control |
04/09/2002 |
EN 27434, EN27434 |
Slotted set screws with cone point |
15/10/1992 |
EN 27435, EN27435 |
Slotted set screws with long dog point |
15/10/1992 |
EN 27436, EN27436 |
Slotted set screws with cup point |
15/10/1992 |
EN 2744, EN2744 |
Non-metallic materials. Preferred test temperatures |
15/08/1992 |
EN 2746, EN2746 |
Glass fibre reinforced plastics. Flexural test. Three point bend method |
15/11/1998 |
EN 2747, EN2747 |
Glass fibre reinforced plastics. Tensile test |
15/11/1998 |
EN 275, EN275 |
Wood preservatives. Determination of the protective effectiveness against marine borers |
15/11/1992 |
EN 2752, EN2752 |
Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235$0DC |
29/06/1990 |
EN 2753, EN2753 |
Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification |
15/12/1996 |
EN 2754, EN2754 |
Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1 100 MPa/235$0C |
31/05/2006 |
EN 27627-1, EN27627-1 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. General requirements |
15/06/1993 |
EN 27627-2, EN27627-2 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of calcium, potassium, magnesium and sodium i |
15/06/1993 |
EN 27627-3, EN27627-3 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese and nickel in cont |
15/06/1993 |
EN 27627-4, EN27627-4 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of molybdenum, titanium and vanadium in conte |
15/06/1993 |
EN 27627-5, EN27627-5 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese, molybdenum, nicke |
15/06/1993 |
EN 27627-6, EN27627-6 |
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of chromium in contents 0,01 to 2 % ($7Im/m$7 |
15/06/1993 |
EN 277, EN277 |
Sacks for the transport of food aid. Sacks made of woven polypropylene fabric |
15/02/1996 |
EN 27721, EN27721 |
Countersunk head screws. Head configuration and gauging |
01/05/1992 |
EN 27740, EN27740 |
Specification for dimensions of surgical scalpels with detatchable blades |
15/10/1992 |
EN 27787-3, EN27787-3 |
Specification for dental rotary instruments. Cutters. Carbide laboratory cutters for milling machines |
15/09/1992 |
EN 278, EN278 |
Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar |
29/11/1991 |
EN 2781, EN2781 |
Non-metallic materials. Structural adhesives. Test methods. Determination of the primer thickness |
15/10/1998 |
EN 27828, EN27828 |
Water quality. Methods for biological testing. Methods of biological sampling: guidance on handnet sampling of aquatic benthic mac |
29/11/1985 |
EN 27841, EN27841 |
Methods for determination of steam loss of automatic steam traps |
29/11/1991 |
EN 27842, EN27842 |
Methods for determination of discharge capacity of automatic steam traps |
29/11/1991 |
EN 27888, EN27888 |
Water quality. Method for the determination of electrical conductivity |
15/11/1993 |
EN 279, EN279 |
Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar |
29/11/1991 |
EN 2790, EN2790 |
Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dime |
30/08/1991 |
To obtain a direct quote for any standard, including delivery,
CLICK HERE
|
| |
|
|
To obtain a quote for any standard, including delivery,
CLICK HERE
|
|
|
