 |
|
|
EN STANDARDS: EN 2791, EN2791 -
|
Title |
Date |
|
EN 2791, EN2791 |
Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads |
30/08/1991 |
EN 2792, EN2792 |
Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads |
30/08/1991 |
EN 27931, EN27931 |
Specification for insulation caps and bushes for resistance welding equipment |
15/07/1992 |
EN 2794-001, EN2794-001 |
Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification |
15/08/1999 |
EN 2794-003, EN2794-003 |
Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard |
15/08/1999 |
EN 2794-004, EN2794-004 |
Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard |
15/08/1999 |
EN 27941, EN27941 |
Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chromatography |
31/03/1994 |
EN 27963, EN27963 |
Specification for calibration block No. 2 for ultrasonic examination of welds |
15/06/1992 |
EN 27965-1, EN27965-1 |
Packaging. Sacks. Drop test. Paper sacks |
15/02/1993 |
EN 280, EN280 |
Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests |
18/09/2001 |
EN 2802, EN2802 |
Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm $3L a $3L 6 mm |
04/10/2005 |
EN 28029, EN28029 |
Plastics hose. General purpose collapsible water hose, textile reinforced. Specification |
30/04/1987 |
EN 2803, EN2803 |
Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm <= a <= 6 mm |
04/10/2005 |
EN 28033, EN28033 |
Rubber and plastics hose. Determination of adhesion between components |
15/06/1992 |
EN 28049, EN28049 |
Ferronickel shot. Sampling for analysis |
15/07/1992 |
EN 28050, EN28050 |
Ferronickel ingots or pieces. Sampling for analysis |
15/07/1992 |
EN 28064, EN28064 |
Information processing. Reels for 12,7 mm (0,5 in) wide magnetic tapes. Sizes 16, 18 and 22 |
31/05/1989 |
EN 2808, EN2808 |
Anodizing of titanium and titanium alloys |
15/08/1997 |
EN 2809, EN2809 |
Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated. |
15/07/2001 |
EN 28094, EN28094 |
Steel cord conveyor belts. Adhesion strength test of the cover to the core layer |
15/05/1994 |
EN 2810, EN2810 |
Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Cl |
15/07/2001 |
EN 28167, EN28167 |
Specification for projections for resistance welding |
15/08/1992 |
EN 282, EN282 |
Avalanche beacons. Transmitter/receiver systems. Safety requirements and testing |
15/01/1997 |
EN 28206, EN28206 |
Acceptance tests for oxygen cutting machines. Reproducible accuracy. Operational characteristics |
15/10/1992 |
EN 28233, EN28233 |
Thermoplastics valves. Torque. Test method |
15/10/1992 |
EN 28265, EN28265 |
Water quality. Biological methods. Methods of biological sampling: guidance on the design and use of quantitative samplers for ben |
29/09/1989 |
EN 2828, EN2828 |
Adhesion test for metallic coatings by burnishing |
15/05/1993 |
EN 2829, EN2829 |
Adhesion test for metallic coatings by shot peening |
15/03/1995 |
EN 283, EN283 |
Swap bodies. Testing |
20/12/1991 |
EN 2830, EN2830 |
Adhesion test for metallic coatings by shearing action |
15/05/1993 |
EN 2831, EN2831 |
Hydrogen embrittlement of steels. Test by slow bending |
15/05/1993 |
EN 2832, EN2832 |
Hydrogen embrittlement of steels. Notched specimen test |
15/05/1993 |
EN 28362-2, EN28362-2 |
Injection containers for injectables and accessories. Closures for injection vials |
15/08/1993 |
EN 28394, EN28394 |
Building construction. Jointing products. Determination of extrudability of one-component sealants |
30/08/1991 |
EN 284, EN284 |
Swap bodies. Swap bodies of class C. Dimensions and general requirements |
15/06/1992 |
EN 28430-1, EN28430-1 |
Specification for resistance spot welding. Electrode holders. Taper fixing 1:10 |
15/07/1992 |
EN 28430-2, EN28430-2 |
Specification for resistance spot welding. Electrode holders. Morse taper fixing |
15/07/1992 |
EN 28430-3, EN28430-3 |
Specification for resistance spot welding. Electrode holders. Parallel shank fixing for end thrust |
15/07/1992 |
EN 28474, EN28474 |
Complete, filled transport packages. Method for determination of resistance to immersion in water |
30/09/1987 |
EN 285, EN285 |
Sterilization. Steam sterilizers. Large sterilizers |
15/09/1997 |
EN 285, EN285 |
Sterilization. Steam sterilizers. Large sterilizers |
30/06/2006 |
EN 2851, EN2851 |
Marking of parts and assemblies other than engines. Indications on drawings |
15/06/1992 |
EN 28510-1, EN28510-1 |
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90$0D peel |
31/05/1991 |
EN 28510-2, EN28510-2 |
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 180$0D peel |
31/05/1991 |
EN 2853, EN2853 |
Current ratings for electrical cables with conductor EN 2083 |
02/03/2006 |
EN 2858-1, EN2858-1 |
Titanium and titanium alloys. Forging stock and forgings. Technical specifications. General requirements |
15/07/1994 |
EN 2858-2, EN2858-2 |
Titanium and titanium alloys. Forging stock and forgings. Technical specification. Forging stock |
15/07/1994 |
EN 2858-3, EN2858-3 |
Titanium and titanium alloys. Forging stock and forgings. Technical specifications. Pre-production and production forgings |
15/07/1994 |
EN 2859, EN2859 |
Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa |
15/09/1995 |
EN 28601, EN28601 |
Specification for representation of dates and times in information interchange |
30/06/1989 |
EN 286-1, EN286-1 |
Simple unfired pressure vessels designed to contain air or nitrogen. Pressure vessels for general purposes |
15/11/1998 |
EN 286-2, EN286-2 |
Simple unfired pressure vessels designed to contain air or nitrogen. Specification for pressure vessels for air braking and auxili |
15/11/1992 |
EN 286-3, EN286-3 |
Simple unfired pressure vessels designed to contain air or nitrogen. Steel pressure vessels designed for air braking equipment and |
15/02/1995 |
EN 28630-1, EN28630-1 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulati |
30/09/1988 |
EN 28630-2, EN28630-2 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulati |
30/09/1988 |
EN 28630-3, EN28630-3 |
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulati |
30/09/1988 |
EN 286-4, EN286-4 |
Simple unfired pressure vessels designed to contain air or nitrogen. Aluminium alloy pressure vessels designed for air braking equ |
15/02/1995 |
EN 28653, EN28653 |
Jewellery. Ring-sizes. Definition, measurement and designation |
15/03/1993 |
EN 28654, EN28654 |
Colours of gold alloys. Definition, range of colours and designation |
15/03/1993 |
EN 28659, EN28659 |
Thermoplastics valves. Fatigue strength. Test method |
15/10/1992 |
EN 28662-1, EN28662-1 |
Hand-held portable power tools. Measurement of vibrations at the handle. General |
15/01/1993 |
EN 28662-2, EN28662-2 |
Hand-held portable power tools. Measurement of vibrations at the handle. Chipping hammers and riveting hammers |
15/01/1995 |
EN 28662-3, EN28662-3 |
Hand-held portable power tools. Measurement of vibrations at the handle. Rock drills and rotary hammers |
15/01/1995 |
EN 28662-5, EN28662-5 |
Hand-held portable power tools. Measurement of vibrations at the handle. Pavement breakers and hammers for construction work |
15/01/1995 |
EN 2870, EN2870 |
Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classi |
15/12/1996 |
EN 287-1, EN287-1 |
Qualification test of welders. Fusion welding. Steels |
10/03/2004 |
EN 28736, EN28736 |
Taper pins with internal thread, unhardened |
15/10/1992 |
EN 28737, EN28737 |
Taper pins with external thread, unhardened |
15/10/1992 |
EN 28738, EN28738 |
Plain washers for clevis pins. Product grade A |
15/10/1992 |
EN 2874, EN2874 |
Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated |
15/12/1996 |
EN 28749, EN28749 |
Pins and grooved pins. Shear test |
15/11/1992 |
EN 28768, EN28768 |
Complete, filled transport packages. Method for determination of resistance to damage by toppling |
30/09/1987 |
EN 2881, EN2881 |
Aerospace series. Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting |
30/06/2006 |
EN 28839, EN28839 |
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals |
01/04/1992 |
EN 2884, EN2884 |
Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS$d2 lubrica |
15/05/1996 |
EN 28846, EN28846 |
Small craft. Electrical devices. Protection against ignition of surrounding flammable gases |
15/11/1993 |
EN 28848, EN28848 |
Small craft. Remote steering systems |
15/11/1993 |
EN 2885, EN2885 |
Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classifica |
15/05/1996 |
EN 2886, EN2886 |
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classificat |
15/12/1996 |
EN 2887, EN2887 |
Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temp |
15/08/1995 |
EN 28877, EN28877 |
Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments f |
15/08/1994 |
EN 2888, EN2888 |
Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classificatio |
15/09/1995 |
EN 2889, EN2889 |
Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa |
15/08/1995 |
EN 288-9, EN288-9 |
Specification and approval of welding procedures for metallic materials. Welding procedure test for pipeline welding on land and o |
15/08/1999 |
EN 289, EN289 |
Plastics and rubber machines. Presses. Safety requirements |
21/07/2004 |
EN 28960, EN28960 |
Refrigerators, frozen food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne a |
15/09/1993 |
EN 2897, EN2897 |
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classificat |
15/12/1996 |
EN 28970, EN28970 |
Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density |
31/07/1991 |
EN 29008, EN29008 |
Glass bottles. Verticality. Test method |
15/07/1994 |
EN 29009, EN29009 |
Glass containers. Height and non-parallelism of finish with reference to container base. Test methods |
15/07/1994 |
EN 29048, EN29048 |
Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus |
30/08/1991 |
EN 29052-1, EN29052-1 |
Acoustics. Method for the determination of dynamic stiffness. Materials used under floating floors in dwellings |
15/09/1992 |
EN 29053, EN29053 |
Acoustics. Materials for acoustical applications. Determination of airflow resistance |
15/05/1993 |
EN 2906, EN2906 |
Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650$0 |
15/12/1994 |
EN 2907, EN2907 |
Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa (at ambient te |
15/02/1996 |
EN 29070, EN29070 |
Information technology. SGML support facilities. Registration procedures for public text owner identifiers |
28/06/1991 |
EN 29073-1, EN29073-1 |
Methods of test for nonwovens. Methods of test for nonwovens. Determination of mass per unit area |
31/10/1990 |
EN 29073-3, EN29073-3 |
Methods of test for nonwovens. Methods of test for nonwovens. Determination of tensile strength and elongation |
31/10/1990 |
EN 2908, EN2908 |
Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient |
15/12/1994 |
EN 2909, EN2909 |
Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 |
15/11/1995 |
EN 29090, EN29090 |
Specification for gas tightness of equipment for gas welding and allied processes |
15/07/1992 |
EN 29092, EN29092 |
Textiles. Nonwovens. Definition |
15/11/1992 |
EN 291, EN291 |
Rubber seals. Static seals in domestic appliances for combustible gas up to 200 mbar. Specification for material |
01/05/1992 |
EN 2910, EN2910 |
Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650$0DC |
15/12/1994 |
EN 29104, EN29104 |
Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids |
31/10/1991 |
EN 2911, EN2911 |
Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperatu |
15/11/1995 |
EN 29117, EN29117 |
Methods of test for paints. Tests associated with paint film formation. Paints and varnishes. Determination of through-dry state a |
31/01/1991 |
EN 2912, EN2912 |
Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
15/06/1996 |
EN 2913, EN2913 |
Washers, flat, large diameter, in steel, cadmium plated |
15/03/2000 |
EN 2914, EN2914 |
Washers, flat, large diameter, in heat resisting steel, passivated |
15/06/1996 |
EN 29168, EN29168 |
Dental handpieces. Hose connectors |
15/10/1994 |
EN 29171-1, EN29171-1 |
Information technology. 130 mm optical disk cartridge, write once, for information interchange. Unrecorded optical disk cartridge |
30/04/1991 |
EN 29171-2, EN29171-2 |
Information technology. 130 mm optical disk cartridge, write once, for information interchange. Recording format |
30/04/1991 |
EN 29202, EN29202 |
Jewellery. Fineness of precious metal alloys |
15/02/1993 |
EN 29241-2, EN29241-2 |
Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on task requirements |
15/06/1993 |
EN 29241-3, EN29241-3 |
Ergonomic requirements for office work with visual display terminals (VDTs). Visual display requirements |
15/06/1993 |
EN 2925, EN2925 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286). Classification: 900 MPa (at am |
15/11/1994 |
EN 2926, EN2926 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: |
15/06/1996 |
EN 2927, EN2927 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classificati |
15/06/1996 |
EN 2928, EN2928 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plate |
15/06/1996 |
EN 2929, EN2929 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: |
15/07/1996 |
EN 293, EN293 |
Specification for oil pressure atomizing nozzles. Minimum requirements. Testing |
15/08/1992 |
EN 2930, EN2930 |
Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. |
15/06/1996 |
EN 2931, EN2931 |
Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperat |
15/11/1994 |
EN 29313, EN29313 |
Specification for resistance spot welding equipment. Cooling tubes |
15/07/1992 |
To obtain a direct quote for any standard, including delivery,
CLICK HERE
|
| |
|
|
To obtain a quote for any standard, including delivery,
CLICK HERE
|
|
|
