EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 2932, EN2932 -

Standard
Title
Date
EN 2932, EN2932
Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at a
15/06/1996
EN 2933, EN2933
Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (
15/06/1996
EN 29333, EN29333
Specification for dental brazing materials
28/02/1992
EN 2934, EN2934
Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classifica
15/06/1996
EN 2935, EN2935
Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification:1210 MPa (at
15/06/1996
EN 2936, EN2936
Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classificatio
15/06/1996
EN 29367-1, EN29367-1
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Commercial vehicle
30/04/1991
EN 29367-2, EN29367-2
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Semi-trailers
15/02/1994
EN 2937, EN2937
Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/6
15/11/1994
EN 2938, EN2938
Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900 MPa (at ambi
15/04/1996
EN 2939, EN2939
Screws, 100$0D countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classificatio
15/12/1994
EN 294, EN294
Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
15/09/1992
EN 2940, EN2940
Screws, 100$0D countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plat
15/04/1996
EN 2942, EN2942
Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
15/08/1998
EN 2943, EN2943
Inserts, screw thread, helical coil, self-locking. Technical specification
15/11/1998
EN 2944, EN2944
Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
15/08/1998
EN 2945, EN2945
Inserts, screw thread, helical coil, self-locking. Assembly procedure
15/08/1998
EN 29453, EN29453
Soft solder alloys. Chemical compositions and forms
15/02/1994
EN 29454-1, EN29454-1
Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging
15/03/1994
EN 29455-1, EN29455-1
Soft soldering fluxes. Test methods. Determination of non-volatile matter, gravimetric method
15/02/1994
EN 29455-11, EN29455-11
Soft soldering fluxes. Test methods. Solubility of flux residues
15/12/1993
EN 29455-14, EN29455-14
Soft soldering fluxes. Test methods. Assessment of tackiness of flux residues
15/12/1993
EN 29455-5, EN29455-5
Soft soldering fluxes. Test methods. Copper mirror test
15/12/1993
EN 29455-8, EN29455-8
Soft soldering fluxes. Test methods. Determination of zinc content
15/12/1993
EN 2948, EN2948
Washers, tab, in heat resisting steel, passivated
15/02/1997
EN 2949, EN2949
Washers, wire locking, in corrosion resisting steel, passivated
15/02/1997
EN 295-1, EN295-1
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements
31/10/1991
EN 295-10, EN295-10
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Performance requirements
29/09/2005
EN 29519, EN29519
Shipbuilding and marine structures. Rungs for dog-step ladders
30/08/1991
EN 295-2, EN295-2
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling
31/10/1991
EN 295-3, EN295-3
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods
31/10/1991
EN 29539, EN29539
Specification for materials for equipment used in gas welding, cutting and allied processes
15/07/1992
EN 295-4, EN295-4
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and compatibl
15/09/1995
EN 2955, EN2955
Recycling of titanium and titanium alloy scrap
15/09/1993
EN 295-5, EN295-5
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and fitt
15/08/1994
EN 295-6, EN295-6
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes
15/04/1996
EN 295-7, EN295-7
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay pipes and joints for pipe
15/04/1996
EN 297, EN297
Gas-fired central heating boilers. Type B$d1$d1 and B$d1$d1$dB$dS boilers fitted with atmospheric burners of nominal heat input no
15/10/1994
EN 29775, EN29775
Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power
15/11/1993
EN 298, EN298
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
03/10/2003
EN 2985, EN2985
Nickel-cadmium batteries of format A type
15/11/1996
EN 2986, EN2986
Nickel-cadmium batteries of format B type
15/11/1996
EN 29865, EN29865
Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test
15/11/1993
EN 2987, EN2987
Nickel-cadmium batteries of format C type
15/11/1996
EN 2988, EN2988
Nickel-cadmium batteries of format D type
15/11/1996
EN 29885, EN29885
Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
15/07/1994
EN 299, EN299
Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
15/04/1999
EN 2991, EN2991
Nickel-cadmium batteries of format E type
15/11/1996
EN 2993, EN2993
Nickel-cadmium batteries of format F type
15/11/1996
EN 2997-1, EN2997-1
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-10, EN2997-10
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-11, EN2997-11
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-2, EN2997-2
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-3, EN2997-3
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-4, EN2997-4
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-5, EN2997-5
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-6, EN2997-6
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-7, EN2997-7
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-8, EN2997-8
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2997-9, EN2997-9
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC c
15/09/1997
EN 2998, EN2998
Washers, flat, in heat resisting steel, passivated
15/06/1996
EN 300, EN300
Oriented strand boards (OSB). Definitions, classification and specifications
15/09/1997
EN 3004, EN3004
Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650$0D
15/06/1997
EN 3005, EN3005
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoa
06/01/2005
EN 3006, EN3006
Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient te
15/11/1994
EN 3007, EN3007
Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated. Classification: 900 MPa
15/06/1996
EN 3008, EN3008
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275
15/08/1998
EN 3009, EN3009
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Clas
15/08/1998
EN 301, EN301
Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements
15/09/1992
EN 3010, EN3010
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 M
15/08/1998
EN 3011, EN3011
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classif
15/07/1998
EN 30-1-1, EN30-1-1
Domestic cooking appliances burning gas. Safety. General
15/12/1998
EN 3012, EN3012
Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient te
15/02/1996
EN 30-1-2, EN30-1-2
Domestic cooking appliances burning gas. Safety. Appliances having forced-convection ovens and/or grills. Section 2 Forced convect
15/12/1999
EN 3013, EN3013
Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa
15/02/1996
EN 30-1-3, EN30-1-3
Domestic cooking appliances burning gas. Safety. Appliances having a glass ceramic hotplate
10/12/2003
EN 3014, EN3014
Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambie
15/07/2001
EN 30-1-4, EN30-1-4
Domestic cooking appliances burning gas. Safety. Appliances having one or more burners with an automatic burner control system
12/09/2002
EN 3015, EN3015
Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 110
15/07/2001
EN 30-2-1, EN30-2-1
Domestic cooking appliances burning gas. Rational use of energy. General
15/09/1998
EN 302-1, EN302-1
Adhesives for load bearing timber structures. Test methods. Determination of bond strength in longitudinal tensile shear strength
23/07/2004
EN 30-2-2, EN30-2-2
Domestic cooking appliances burning gas. Rational use of energy. Appliances having forced-convection ovens and/or grills. Section
15/12/1999
EN 302-2, EN302-2
Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
22/07/2004
EN 302-3, EN302-3
Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperatu
22/07/2004
EN 302-4, EN302-4
Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
22/07/2004
EN 3026, EN3026
Test method for dry film lubricants. Corrosion test on steel specimens
15/04/1994
EN 302-6, EN302-6
Adhesives for load-bearing timber structures. Test methods. Determination of the conventional pressing time
23/07/2004
EN 3027, EN3027
Test method for dry film lubricants. Salt spray test
15/04/1994
EN 302-7, EN302-7
Adhesives for load-bearing timber structures. Test methods. Determination of the conventional working life
21/07/2004
EN 3030, EN3030
Test method for dry film lubricants. Solids content
15/04/1994
EN 303-1, EN303-1
Heating boilers. Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
15/08/1999
EN 3032, EN3032
Test method for dry film lubricants. Thickness measurement
15/04/1994
EN 303-2, EN303-2
Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
15/03/1999
EN 30326-1, EN30326-1
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
15/10/1994
EN 303-3, EN303-3
Heating boilers. Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner
15/03/1999
EN 303-4, EN303-4
Heating boilers. Heating boilers with forced draught burners. Heating boilers with forced draught burners. Special requirements fo
15/08/1999
EN 3035, EN3035
Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmi
15/02/1997
EN 303-5, EN303-5
Heating boilers. Heating boilers with forced draught burners. Heating boilers for solid fuels, hand and automatically fired, nomin
15/11/1999
EN 303-6, EN303-6
Heating boilers. Heating boilers with forced draught burners. Specific requirements for the domestic hot water operation of combin
15/05/2000
EN 3037, EN3037
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubrica
15/02/1997
EN 3038, EN3038
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, pass
15/02/1997
EN 304, EN304
Heating boilers. Test code for heating boilers for atomizing oil burners
15/12/1992
EN 3044, EN3044
Installation holes for inserts, screw thread, helical coil, self-locking. Design standard
15/08/1998
EN 3045, EN3045
Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensio
15/02/1994
EN 3046, EN3046
Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance ca
15/02/1994
EN 3047, EN3047
Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearanc
15/02/1994
EN 3048, EN3048
Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient tempera
09/11/2001
EN 3049, EN3049
O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD
15/08/1998
EN 305, EN305
Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all
15/07/1997
EN 3050, EN3050
O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification
15/08/1998
EN 3052, EN3052
Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Class
15/03/1994
EN 3053, EN3053
Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads
15/07/1994
EN 3054, EN3054
Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads
15/07/1994
EN 3055, EN3055
Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads
15/07/1994
EN 3056, EN3056
Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads
15/07/1994
EN 3057, EN3057
Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads
15/07/1994
EN 3058, EN3058
Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads
15/07/1994
EN 306, EN306
Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
15/10/1997
EN 3063, EN3063
Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy).
15/11/1994
EN 3064, EN3064
Shank nuts, self-locking, serrated. Installation procedure
15/10/1996
EN 3065, EN3065
Installation holes for self-locking, serrated shank nuts. Design standard
15/12/1996
EN 307, EN307
Heat exchangers. Guidelines for preparing installation, operating and maintenance instructions required to maintain the performanc
15/03/1999
EN 308, EN308
Heat exchangers. Test procedures for establishing the performance of air to air and flue gases heat recovery devices
15/07/1997
EN 3081, EN3081
Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Ferrules welded, with dynamic beam seal end, for repair
18/10/2001
EN 3082, EN3082
Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Unions, bulkhead welded, for repair
18/10/2001


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE