|
Title |
Date |
|
EN 563, EN563 |
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces |
15/11/1994 |
EN 564, EN564 |
Mountaineering equipment. Accessory cord. Safety requirements and test methods |
15/08/1997 |
EN 565, EN565 |
Mountaineering equipment. Tape. Safety requirements and test methods |
15/08/1997 |
EN 566, EN566 |
Mountaineering equipment. Slings. Safety requirements and test methods |
15/08/1997 |
EN 567, EN567 |
Mountaineering equipment. Rope clamps. Safety requirements and test methods |
15/08/1997 |
EN 568, EN568 |
Mountaineering equipment. Ice anchors. Safety requirements and test methods |
15/08/1997 |
EN 569, EN569 |
Mountaineering equipment. Pitons. Safety requirements and test methods |
15/08/1997 |
EN 570, EN570 |
Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications |
15/04/1995 |
EN 571-1, EN571-1 |
Non-destructive testing. Penetrant testing. General principles |
15/06/1997 |
EN 572-1, EN572-1 |
Glass in building. Basic soda lime silicate glass products. Definitions and general physical and mechanical properties |
01/07/2004 |
EN 572-2, EN572-2 |
Glass in building. Basic soda lime silicate glass products. Float glass |
01/07/2004 |
EN 572-3, EN572-3 |
Glass in building. Basic soda lime silicate glass products. Polished wire glass |
01/07/2004 |
EN 572-4, EN572-4 |
Glass in building. Basic soda lime silicate glass products. Drawn sheet glass |
01/07/2004 |
EN 572-5, EN572-5 |
Glass in building. Basic soda lime silicate glass products. Patterned glass |
01/07/2004 |
EN 572-6, EN572-6 |
Glass in building. Basic soda lime silicate glass products. Wired patterned glass |
01/07/2004 |
EN 572-7, EN572-7 |
Glass in building. Basic soda lime silicate glass products. Wired or unwired channel shaped glass |
01/07/2004 |
EN 572-8, EN572-8 |
Glass in building. Basic soda lime silicate glass products. Supplied and final cut sizes |
11/06/2004 |
EN 572-9, EN572-9 |
Glass in building. Basic soda lime silicate glass products. Evaluation of conformity/Product standard |
14/10/2004 |
EN 573-1, EN573-1 |
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system |
18/11/2004 |
EN 573-2, EN573-2 |
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical symbol based designation system |
15/01/1995 |
EN 573-3, EN573-3 |
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition |
21/07/2003 |
EN 573-4, EN573-4 |
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Forms of products |
26/01/2004 |
EN 574, EN574 |
Safety of machinery. Two-hand control devices. Functional aspects. Principles for design |
15/03/1997 |
EN 575, EN575 |
Aluminium and aluminium alloys. Master alloys produced by melting. Specifications |
15/04/1996 |
EN 576, EN576 |
Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications |
30/10/2003 |
EN 577, EN577 |
Aluminium and aluminium alloys. Liquid metal. Specifications |
15/05/1996 |
EN 579, EN579 |
Plastics piping systems. Crosslinked polyethylene (PE-X) pipes. Determination of degree of crosslinking by solvent extraction |
15/07/1994 |
EN 58, EN58 |
Bitumen and bituminous binders. Sampling bituminous binders |
04/08/2004 |
EN 580, EN580 |
Plastics piping Systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Test methods for the resistance to dichloromethane at a |
29/04/2003 |
EN 581-1, EN581-1 |
Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements |
28/04/2006 |
EN 581-3, EN581-3 |
Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for |
15/10/1999 |
EN 582, EN582 |
Thermal spraying. Determination of tensile adhesive strength |
15/01/1994 |
EN 583-1, EN583-1 |
Non-destructive testing. Ultrasonic examination. General principles |
15/03/1999 |
EN 583-2, EN583-2 |
Non-destructive testing. Ultrasonic examination. Sensitivity and range setting |
15/03/2001 |
EN 583-3, EN583-3 |
Non-destructive testing. Ultrasonic examination. Transmission technique |
15/09/1997 |
EN 583-4, EN583-4 |
Non-destructive testing. Ultrasonic examination. Examination for discontinuities perpendicular to the surface |
10/10/2002 |
EN 583-5, EN583-5 |
Non-destructive testing. Ultrasonic examination. Characterization and sizing of discontinuities |
15/01/2001 |
EN 584-1, EN584-1 |
Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography |
31/05/2006 |
EN 584-2, EN584-2 |
Non-destructive testing. Industrial radiographic film. Control of film processing by means of reference values |
15/06/1997 |
EN 586-1, EN586-1 |
Aluminium and aluminium alloys. Forgings. Technical conditions for inspection and delivery |
15/02/1998 |
EN 586-2, EN586-2 |
Aluminium and aluminium alloys. Forgings. Mechanical properties and additional property requirements |
15/10/1994 |
EN 586-3, EN586-3 |
Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form |
11/04/2002 |
EN 588-1, EN588-1 |
Fibre-cement pipes for sewers and drains. Pipes, joints and fittings for gravity systems |
15/04/1997 |
EN 588-2, EN588-2 |
Fibre-cement pipes for sewers and drains. Manholes and inspection chambers |
03/04/2002 |
EN 589, EN589 |
Automotive fuels. LPG. Requirements and test methods |
14/09/2004 |
EN 590, EN590 |
Automotive fuels. Diesel. Requirements and test methods |
27/08/2004 |
EN 591, EN591 |
Instructions for use for in vitro diagnostic instruments for professional use |
15/05/2001 |
EN 592, EN592 |
Instructions for use for in vitro diagnostic instruments for self-testing |
03/05/2002 |
EN 593, EN593 |
Industrial valves. Metallic butterfly valves |
03/03/2004 |
EN 594, EN594 |
Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels |
15/05/1996 |
EN 595, EN595 |
Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour |
15/10/1995 |
EN 596, EN596 |
Timber structures. Test methods. Soft body impact test of timber framed walls |
15/10/1995 |
EN 597-1, EN597-1 |
Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: smouldering cigarette |
15/05/1995 |
EN 597-2, EN597-2 |
Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent |
15/05/1995 |
EN 598, EN598 |
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods |
15/01/1995 |
EN 599-1, EN599-1 |
Durability of wood and wood-based products. Performance of preservatives as determined by biological tests. Specification accordin |
15/04/1997 |
EN 599-2, EN599-2 |
Durability of wood and wood-based products. Performance of preservatives as determined by biological tests. Classification and lab |
15/04/1997 |
EN 600, EN600 |
Natural rubber latex male condoms |
15/08/1996 |
EN 60034-1, EN60034-1 |
Rotating electrical machines. Rating and performance |
15/11/1998 |
EN 60034-1, EN60034-1 |
Rotating electrical machines. Rating and performance |
10/01/2006 |
EN 60034-11, EN60034-11 |
Rotating electrical machines. Thermal protection |
09/02/2005 |
EN 60034-12, EN60034-12 |
Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors |
12/06/2002 |
EN 60034-14, EN60034-14 |
Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluatio |
15/11/1998 |
EN 60034-14, EN60034-14 |
Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56mm and higher. Measurement, evaluation |
02/11/2004 |
EN 60034-15, EN60034-15 |
Rotating electrical machines. Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils |
15/07/1996 |
EN 60034-16-1, EN60034-16-1 |
Rotating electrical machines. Excitation systems for synchronous machines. Definitions |
15/05/1992 |
EN 60034-18-1, EN60034-18-1 |
Rotating electrical machines. Functional evaluation of insulation systems. General guidelines |
15/12/1994 |
EN 60034-18-21, EN60034-18-21 |
Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evalua |
15/12/1994 |
EN 60034-18-22, EN60034-18-22 |
Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Classification |
15/06/2001 |
EN 60034-18-31, EN60034-18-31 |
Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evalua |
15/12/1994 |
EN 60034-2, EN60034-2 |
Rotating electrical machines. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding |
15/10/1999 |
EN 60034-22, EN60034-22 |
Rotating electrical machines. A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets |
15/10/1998 |
EN 60034-3, EN60034-3 |
Rotating electrical machines. Specific requirements for turbine-type synchronous machines |
15/08/1992 |
EN 60034-3, EN60034-3 |
Rotating electrical machines. Specific requirements for cylindrical rotor synchronous machines |
14/02/2006 |
EN 60034-4, EN60034-4 |
Rotating electrical machines. Methods for determining synchronous machine quantities from tests |
29/02/1988 |
EN 60034-5, EN60034-5 |
Rotating electrical machines. Degrees of protection provided by the integral design of rotating electrical machines (IP code). Cla |
15/06/2001 |
EN 60034-6, EN60034-6 |
Rotating electrical machines. Methods of cooling (IC Code) |
15/02/1994 |
EN 60034-7, EN60034-7 |
Rotating electrical machines. Classification of types of constructions and mounting arrangements (IM Code) |
15/10/1993 |
EN 60034-8, EN60034-8 |
Rotating electrical machines. Terminal markings and direction of rotation |
25/11/2002 |
EN 60034-9, EN60034-9 |
Rotating electrical machines. Noise limits |
15/02/1998 |
EN 60034-9, EN60034-9 |
Rotating electrical machines. Noise limits |
31/10/2005 |
EN 60041, EN60041 |
Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
15/09/1995 |
EN 60044-1, EN60044-1 |
Instrument transformers. Current transformers |
15/11/1999 |
EN 60044-2, EN60044-2 |
Instrument transformers. Inductive voltage transformers |
15/08/1999 |
EN 60044-3, EN60044-3 |
Instrument transformers. Combined transformers |
05/03/2003 |
EN 60044-5, EN60044-5 |
Instrument transformers. Capacitor voltage transformers |
16/09/2004 |
EN 60044-6, EN60044-6 |
Instrument transformers. Requirements for protective current transformers for transient performance |
15/08/1999 |
EN 60044-7, EN60044-7 |
Instrument transformers. Electronic voltage transformers |
15/05/2000 |
EN 60044-8, EN60044-8 |
Instrument transformers. Electronic current transformers |
04/10/2002 |
EN 60045-1, EN60045-1 |
Guide to steam turbine procurement. Guide to steam turbine procurement |
15/08/1993 |
EN 60051-1, EN60051-1 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Definitions and general requirements com |
15/06/1999 |
EN 60052, EN60052 |
Voltage measurement by means of standard air gaps |
10/07/2003 |
EN 60059, EN60059 |
IEC standard current ratings |
15/10/1999 |
EN 60060-2, EN60060-2 |
High-voltage test techniques. Measuring systems |
15/08/1995 |
EN 60060-3, EN60060-3 |
High voltage test techniques. Definitions and requirements for on-site tests |
31/03/2006 |
EN 60061-1, EN60061-1 |
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lamps caps |
15/05/1997 |
EN 60061-2, EN60061-2 |
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders |
15/05/1997 |
EN 60061-3, EN60061-3 |
Lamps caps and holders together with gauges for the control of interchangeability and safety. Gauges |
15/05/1997 |
EN 60061-4, EN60061-4 |
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Guidelines and gene |
31/08/1990 |
EN 60062, EN60062 |
Marking codes for resistors and capacitors |
16/09/2005 |
EN 60064, EN60064 |
Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements |
15/02/1996 |
EN 60065, EN60065 |
Audio, video and similar electronic apparatus. Safety requirements |
15/11/1998 |
EN 60065, EN60065 |
Audio, video and similar electronic apparatus. Safety requirements |
14/06/2002 |
EN 60068-1, EN60068-1 |
Environmental testing. General and guidance |
15/06/1995 |
EN 60068-2-1, EN60068-2-1 |
Environmental testing. Test methods. Tests A. Cold |
21/12/1990 |
EN 60068-2-10, EN60068-2-10 |
Environmental testing. Tests. Test J and guidance: Mould growth |
09/11/2005 |
EN 60068-2-11, EN60068-2-11 |
Environmental testing. Test methods. Tests. Test KA. Salt mist |
15/09/1999 |
EN 60068-2-13, EN60068-2-13 |
Environmental testing. Test methods. Tests. Test M. Low air pressure |
15/09/1999 |
EN 60068-2-14, EN60068-2-14 |
Environmental testing. Test methods. Test N. Change of temperature |
15/04/2000 |
EN 60068-2-17, EN60068-2-17 |
Environmental testing. Test methods. Test Q. Sealing |
15/05/1995 |
EN 60068-2-18, EN60068-2-18 |
Environmental testing. Test methods. Tests R and guidance. Water |
15/06/2001 |
EN 60068-2-2, EN60068-2-2 |
Environmental testing. Test methods. Tests B. Dry heat |
15/08/1993 |
EN 60068-2-21, EN60068-2-21 |
Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices |
15/06/1999 |
EN 60068-2-27, EN60068-2-27 |
Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ea and guidance. Shock |
29/01/1988 |
EN 60068-2-29, EN60068-2-29 |
Environmental testing. Test methods. Environmental testing procedures. Tests. Test Eb and guidance. Bump |
30/10/1987 |
EN 60068-2-30, EN60068-2-30 |
Environmental testing. Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle) |
08/02/2006 |
EN 60068-2-31, EN60068-2-31 |
Environmental testing. Test methods. Test Ec. Drop and topple, primarily for equipment-type specimens |
31/08/1977 |
EN 60068-2-32, EN60068-2-32 |
Environmental testing. Test methods. Test Ed. Free fall |
31/01/1992 |
EN 60068-2-33, EN60068-2-33 |
Environmental testing. Test methods. Guidance on change of temperature tests |
15/04/2000 |
EN 60068-2-38, EN60068-2-38 |
Environmental testing. Test methods. Tests. Test Z/AD:composite temperature/humidity cyclic test |
15/09/1999 |
EN 60068-2-39, EN60068-2-39 |
Environmental testing. Test methods. Tests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat test |
15/09/1999 |
EN 60068-2-40, EN60068-2-40 |
Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests |
15/04/2000 |
EN 60068-2-41, EN60068-2-41 |
Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests |
15/04/2000 |
EN 60068-2-42, EN60068-2-42 |
Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections |
24/09/2003 |
EN 60068-2-43, EN60068-2-43 |
Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections |
24/09/2003 |
