EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 60137, EN60137 -

Standard
Title
Date
EN 60137, EN60137
Insulated bushings for alternating voltages above 1000 V
25/11/2003
EN 60139, EN60139
Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
15/08/2001
EN 60143-1, EN60143-1
Series capacitors for power systems. General. Performance, testing and rating. Safety requirements. Guide for installation
15/12/1993
EN 60143-1, EN60143-1
Series capacitors for power systems. General
30/09/2005
EN 60143-2, EN60143-2
Series capacitors for power systems. Protective equipment for series capacitor banks
15/07/1995
EN 60143-3, EN60143-3
Series capacitors for power systems. Internal fuses
15/08/1998
EN 60146-1-1, EN60146-1-1
Semiconductor convertors. General requirements and line commutated convertors. Specifications of basic requirements
15/05/1993
EN 60146-1-3, EN60146-1-3
Semiconductor convertors. General requirements and line commutated convertors. Transformers and reactors
15/05/1993
EN 60146-2, EN60146-2
Semiconductor convertors. General requirements and line commutated convertors. Self-commutated semiconductor converters including
15/08/2000
EN 60154-1, EN60154-1
Flanges for waveguides. General requirements
15/09/1996
EN 60154-2, EN60154-2
Flanges for waveguides. Relevant specifications for flanges for ordinary rectangular waveguides
31/01/1985
EN 60155, EN60155
Glow-starters for fluorescent lamps
15/07/1995
EN 60156, EN60156
Insulating liquids. Determination of the breakdown voltage at power frequency. Test method
15/04/1996
EN 60168, EN60168
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V
15/06/1995
EN 60169-21, EN60169-21
Radio-frequency connectors. Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with
15/12/1997
EN 60169-23, EN60169-23
Radio-frequency connectors. Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of oute
15/03/1994
EN 60169-24, EN60169-24
Radio-frequency connectors. Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution
15/03/1994
EN 60169-25, EN60169-25
Radio-frequency connectors. Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inne
15/03/1994
EN 60172, EN60172
Test procedure for the determination of the temperature index of enamelled winding wires
15/03/1996
EN 60182-2, EN60182-2
Basic dimensions of winding wires. Specification for maximum overall diameters of enamelled round winding wires
29/11/1991
EN 60188, EN60188
High-pressure mercury vapour lamps. Performance specifications
28/11/2001
EN 60191-3, EN60191-3
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of integrated circuits
15/06/2000
EN 60191-4, EN60191-4
Mechanical standardization of semiconductor devices. Coding system and classification into forms of package outlines for semicondu
15/06/2000
EN 60191-6, EN60191-6
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
18/02/2005
EN 60191-6-1, EN60191-6-1
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
29/03/2002
EN 60191-6-10, EN60191-6-10
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
31/03/2004
EN 60191-6-12, EN60191-6-12
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
24/09/2002
EN 60191-6-2, EN60191-6-2
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
29/03/2002
EN 60191-6-3, EN60191-6-3
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
15/05/2001
EN 60191-6-4, EN60191-6-4
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
04/08/2003
EN 60191-6-5, EN60191-6-5
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
15/11/2001
EN 60191-6-6, EN60191-6-6
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
05/09/2001
EN 60191-6-8, EN60191-6-8
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semi
16/11/2001
EN 60192, EN60192
Low pressure sodium vapour lamps. Performance specification
25/09/2001
EN 60193, EN60193
Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
28/04/2006
EN 602, EN602
Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of artic
06/05/2004
EN 60204-1, EN60204-1
Safety of machinery. Electrical equipment of machines. Specification for general requirements
15/03/1993
EN 60204-1, EN60204-1
Safety of machinery. Electrical equipment of machines. General requirements
15/11/1998
EN 60204-11, EN60204-11
Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c.
15/04/2001
EN 60204-31, EN60204-31
Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and syste
15/12/1998
EN 60204-32, EN60204-32
Safety of machinery. Electrical equipment of machines. Requirements for hoisting machines
15/12/1998
EN 60205, EN60205
Calculation of the effective parameters of magnetic piece parts
15/08/2001
EN 60214-1, EN60214-1
Tap-changers. Performance requirements and test methods
03/07/2003
EN 60215, EN60215
Safety requirements for radio transmitting equipment
28/09/1990
EN 60216-1, EN60216-1
Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation o
06/03/2002
EN 60216-2, EN60216-2
Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance properties of electrical insulat
02/12/2005
EN 60216-3, EN60216-3
Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
17/09/2002
EN 60216-4-2, EN60216-4-2
Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. T
15/04/2001
EN 60216-4-3, EN60216-4-3
Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. T
15/11/2000
EN 60216-5, EN60216-5
Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insul
18/06/2003
EN 60216-6, EN60216-6
Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insul
20/10/2004
EN 60228, EN60228
Conductors of insulated cables
24/03/2005
EN 60230, EN60230
Impulse tests on cables and their accessories
24/05/2002
EN 60238, EN60238
Edison screw lampholders
15/01/1999
EN 60238, EN60238
Edison screw lampholders
20/01/2005
EN 60239, EN60239
Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces
15/10/1997
EN 60239, EN60239
Graphite electrodes for electric arc furnaces. Dimensions and designation
24/02/2006
EN 60240-1, EN60240-1
Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters
15/11/1994
EN 60243-1, EN60243-1
Methods of test for electric strength of solid insulating materials. Tests at power frequencies
15/04/1998
EN 60243-2, EN60243-2
Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage
15/06/2001
EN 60243-3, EN60243-3
Methods of test for electric strength of solid insulating materials. Additional requirements for 1,2/50 $Gms impulse tests
18/01/2002
EN 60244-1, EN60244-1
Methods of measurement for radio transmitters. General characteristics for broadcast transmitters
15/07/2000
EN 60244-10, EN60244-10
Methods of measurement for radio transmitters. Methods of measurement for television transmitters and transposers employing insert
15/12/1993
EN 60244-11, EN60244-11
Methods of measurement for radio transmitters. Transposers for FM sound broadcasting
15/10/1993
EN 60244-12-1, EN60244-12-1
Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for
15/11/1994
EN 60244-12-2, EN60244-12-2
Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for
15/09/1994
EN 60244-13, EN60244-13
Methods of measurement for radio transmitters. Performance characteristics for FM sound broadcasting
15/12/1993
EN 60244-14, EN60244-14
Methods of measurement for radio transmitters. External intermodulation products caused by two or more transmitters using the same
15/10/1997
EN 60244-15, EN60244-15
Methods of measurement for radio transmitters. Amplitude-modulated transmitters for sound broadcasting
15/05/2000
EN 60244-5, EN60244-5
Methods of measurement for radio transmitters. Performance characteristics of television transmitters
15/06/1995
EN 60244-8, EN60244-8
Methods of measurement for radio transmitters. Performance characteristics of vestigial-sideband demodulators used for testing tel
15/09/1995
EN 60244-9, EN60244-9
Methods of measurement for radio transmitters. Performance characteristics for television transposers
15/08/1995
EN 60247, EN60247
Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan $Gd) and d.c. resistivity
26/04/2004
EN 60249-1, EN60249-1
Base materials for printed circuits. Base materials for printed circuits. Test methods
29/07/1983
EN 60249-2-1, EN60249-2-1
Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality. Specification No.
31/07/1990
EN 60249-2-10, EN60249-2-10
Specifications. Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning tes
28/02/1990
EN 60249-2-11, EN60249-2-11
Specifications. Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in t
28/02/1990
EN 60249-2-12, EN60249-2-12
Specifications. Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of
28/02/1990
EN 60249-2-13, EN60249-2-13
Base material for printed circuits. Specifications. Flexible copper-clad polyimide film, general purpose grade
28/02/1990
EN 60249-2-14, EN60249-2-14
Specifications. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic qua
28/10/1990
EN 60249-2-15, EN60249-2-15
Specifications. Flexible copper-clad polyimide film, of defined flammability
28/06/1991
EN 60249-2-16, EN60249-2-16
Specifications. Specification No. 16. Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical b
15/09/1992
EN 60249-2-17, EN60249-2-17
Specifications. Specification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for us
15/09/1992
EN 60249-2-18, EN60249-2-18
Specifications. Specification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of def
15/09/1992
EN 60249-2-19, EN60249-2-19
Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet o
15/09/1992
EN 60249-2-2, EN60249-2-2
Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality. Specification No 2: Phen
31/07/1990
EN 60249-2-3, EN60249-2-3
Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulos
28/02/1990
EN 60249-2-4, EN60249-2-4
Specifications. Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade. Specification No.
28/02/1990
EN 60249-2-5, EN60249-2-5
Specifications. Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burni
15/09/1994
EN 60249-2-6, EN60249-2-6
Specifications. Specification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burni
15/10/1994
EN 60249-2-7, EN60249-2-7
Specifications. Specification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning
15/10/1994
EN 60249-2-8, EN60249-2-8
Specifications. Specification for flexible copper-clad polyester (PETP) film
28/02/1990
EN 60249-2-9, EN60249-2-9
Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (ve
28/02/1990
EN 60252-1, EN60252-1
A.C. motor capacitors. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
16/04/2002
EN 60252-2, EN60252-2
A.C. motor capacitors. Motor start capacitors
29/10/2003
EN 60254-1, EN60254-1
Lead-acid traction batteries. General requirements and methods of test
15/07/1997
EN 60254-1, EN60254-1
Lead-acid traction batteries. General requirements and methods of test
13/10/2005
EN 60254-2, EN60254-2
Lead-acid traction batteries. Dimensions of cells and terminals and marking of polarity on cells
15/06/1997
EN 60255-21-1, EN60255-21-1
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoi
30/11/1989
EN 60255-21-2, EN60255-21-2
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
22/12/1989
EN 60255-21-3, EN60255-21-3
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Seismic tests
15/12/1993
EN 60255-22-1, EN60255-22-1
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
31/03/2006
EN 60255-22-2, EN60255-22-2
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrostatic discharge tests
15/03/1997
EN 60255-22-3, EN60255-22-3
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Radiated electromagnetic field dist
15/05/2001
EN 60255-22-4, EN60255-22-4
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrical fast transient/burst imm
26/09/2002
EN 60255-22-5, EN60255-22-5
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Surge immunity test
31/07/2002
EN 60255-22-6, EN60255-22-6
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances
15/08/2001
EN 60255-22-7, EN60255-22-7
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Power frequency immunity tests
09/06/2003
EN 60255-24, EN60255-24
Electrical relays. Common format for transient data exchange (COMTRADE) for power systems
15/08/2001
EN 60255-25, EN60255-25
Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment
15/11/2000
EN 60255-26, EN60255-26
Electrical relays. Electromagnetic compatibility requirements for measuring relays and protection equipment
17/02/2005
EN 60255-3, EN60255-3
Electrical relays. Single input energizing quantity measuring relays with dependent or independent time
15/11/1998
EN 60255-5, EN60255-5
Electrical relays. Insulation coordination for measuring relays and protection equipment. Requirements and tests
15/08/2001
EN 60255-6, EN60255-6
Electrical relays. Measuring relays and protection equipment
15/07/1995
EN 60255-8, EN60255-8
Electrical relays. Thermal electrical relays
15/11/1998
EN 60264-1, EN60264-1
Packaging of winding wires. Containers for round winding wires
15/08/1992
EN 60264-2-1, EN60264-2-1
Packaging for winding wires. Cylindrical barrelled delivery spools. Basic dimensions
15/08/1992
EN 60264-2-2, EN60264-2-2
Packaging of winding wires. Cylindrical barrelled delivery spools. Specification for returnable spools made from thermoplastic mat
15/08/1992
EN 60264-2-3, EN60264-2-3
Packaging of winding wires. Cylindrical barrelled delivery spools. Specification for non-returnable spools made from thermoplastic
15/08/1992
EN 60264-3-1, EN60264-3-1
Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions
15/08/2000
EN 60264-3-2, EN60264-3-2
Packaging of winding wires. Taper barrelled delivery spools. Specification for returnable spools made from thermoplastic materials
15/10/1999
EN 60264-3-3, EN60264-3-3
Packaging of winding wires. Taper barrelled delivery spools. Specification for non-returnable spools made from thermoplastic mater
15/08/1992
EN 60264-3-4, EN60264-3-4
Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions of containers for taper barrelled delivery spools. T
15/10/1999
EN 60264-3-5, EN60264-3-5
Packaging of winding wires. Taper barrelled delivery spools. Specification for spool containers made from thermoplastic material
15/10/1999
EN 60264-4-1, EN60264-4-1
Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic material
15/08/1992


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE