EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 60491, EN60491 -

Standard
Title
Date
EN 60491, EN60491
Safety requirements for electronic flash apparatus for photographic purposes
15/06/1997
EN 60495, EN60495
Single sideband power-line carrier terminals
15/08/1994
EN 60503, EN60503
Spools for broadcast videotape recorders (VTRS)
15/06/1998
EN 60505, EN60505
Evaluation and qualification of electrical insulation systems
24/12/2004
EN 60507, EN60507
Artificial pollution tests on high-voltage insulators to be used on a.c. systems
15/09/1993
EN 60510-2-5, EN60510-2-5
Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators
15/07/1996
EN 60510-2-6, EN60510-2-6
Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency demodulators
15/07/1996
EN 60510-3-4, EN60510-3-4
Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems
15/08/1996
EN 60512-1, EN60512-1
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
15/07/2001
EN 60512-10-4, EN60512-10-4
Connectors for electronic equipment. Tests and measurements. Test 10d. Electrical overload (connectors)
13/11/2003
EN 60512-1-1, EN60512-1-1
Connectors for electronic equipment. Tests and measurements. General. Test 1a. Visual examination
27/05/2002
EN 60512-1-100, EN60512-1-100
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. General. Applicabl
15/07/2001
EN 60512-11-1, EN60512-11-1
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11a. C
15/04/1999
EN 60512-11-10, EN60512-11-10
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11j. Cold
27/05/2002
EN 60512-11-11, EN60512-11-11
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11k. Low air pressure
31/05/2002
EN 60512-11-12, EN60512-11-12
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11m. Damp heat, cyclic
29/05/2002
EN 60512-11-13, EN60512-11-13
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connectio
20/05/2002
EN 60512-11-14, EN60512-11-14
Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test
14/11/2003
EN 60512-11-2, EN60512-11-2
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11b. Combined/sequential cold, low air pressure
23/05/2002
EN 60512-11-3, EN60512-11-3
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11c. Damp heat, steady state
20/05/2002
EN 60512-11-4, EN60512-11-4
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11d. Rapid change of temperature
29/05/2002
EN 60512-11-5, EN60512-11-5
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11e. Mould growth
27/05/2002
EN 60512-11-6, EN60512-11-6
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11f. Corrosion, salt mist
20/05/2002
EN 60512-11-7, EN60512-11-7
Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test
25/09/2003
EN 60512-11-8, EN60512-11-8
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. S
15/04/1999
EN 60512-11-9, EN60512-11-9
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11i. Dry heat
20/05/2002
EN 60512-1-2, EN60512-1-2
Connectors for electronic equipment. Tests and measurements. General. Test 1b. Examination of dimension and mass
23/05/2002
EN 60512-12-1, EN60512-12-1
Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12a. Solderability, wetting, solder bath method
30/06/2006
EN 60512-12-2, EN60512-12-2
Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12b: Solderability, wetting, soldering iron met
28/04/2006
EN 60512-12-3, EN60512-12-3
Connectors for electronic equipment. Tests and measurements. Soldering tests. Solderability, de-wetting
28/04/2006
EN 60512-12-4, EN60512-12-4
Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12d: Resistance to soldering heat, solder bath
28/04/2006
EN 60512-12-5, EN60512-12-5
Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12e: Resistance to soldering heat, soldering ir
28/04/2006
EN 60512-12-6, EN60512-12-6
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12f.
15/04/1997
EN 60512-12-7, EN60512-12-7
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12g.
15/08/2001
EN 60512-1-3, EN60512-1-3
Connectors for electronic equipment. Tests and measurements. General. Test 1c. Electrical engagement length
15/12/1997
EN 60512-13-1, EN60512-13-1
Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13a: Engaging and separating forces
28/04/2006
EN 60512-13-2, EN60512-13-2
Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13b: Insertion and withdrawal forces
28/04/2006
EN 60512-13-5, EN60512-13-5
Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13e: Polarizing and keying method
28/04/2006
EN 60512-1-4, EN60512-1-4
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. Test 1d. Contact p
15/12/1997
EN 60512-14-2, EN60512-14-2
Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14b. Sealing. Fine air leakage
30/06/2006
EN 60512-14-4, EN60512-14-4
Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14d. Immersion. Waterproof
30/06/2006
EN 60512-14-5, EN60512-14-5
Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14e. Immersion at low air pressure
30/06/2006
EN 60512-14-6, EN60512-14-6
Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14f. Interfacial sealing
30/06/2006
EN 60512-14-7, EN60512-14-7
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Im
15/05/1998
EN 60512-15-8, EN60512-15-8
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contact
15/03/1997
EN 60512-16-20, EN60512-16-20
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contact
15/04/1997
EN 60512-19-3, EN60512-19-3
Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Fluid resistance
15/01/1998
EN 60512-20-2, EN60512-20-2
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Test 20b. Flammability test
15/07/2001
EN 60512-2-1, EN60512-2-1
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact
30/09/2002
EN 60512-2-2, EN60512-2-2
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact
31/07/2003
EN 60512-2-3, EN60512-2-3
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2c. Contact
23/05/2002
EN 60512-23-3, EN60512-23-3
Connectors for electronic equipment. Tests and measurements. Test 23c. Shielding effectiveness of connectors and accessories
15/07/2001
EN 60512-23-4, EN60512-23-4
Screening and filtering tests. Test 23d: Transmission line reflections in the time domain
24/09/2001
EN 60512-23-7, EN60512-23-7
Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23g. Effective transfer impedance
18/04/2005
EN 60512-2-5, EN60512-2-5
Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance
31/07/2003
EN 60512-25-1, EN60512-25-1
Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
16/11/2001
EN 60512-25-2, EN60512-25-2
Connectors for electronic equipment. Tests and measurements. Test 25b. Attenuation (insertion loss). Section 2 Attenuation (insert
09/07/2002
EN 60512-25-3, EN60512-25-3
Connectors for electronic equipment. Test and measurements. Test 25c. Rise time degradation
16/11/2001
EN 60512-25-4, EN60512-25-4
Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
19/11/2001
EN 60512-25-5, EN60512-25-5
Connectors for electronic equipment. Tests and measurements. Test 25e. Return loss
30/09/2004
EN 60512-25-6, EN60512-25-6
Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter
09/08/2004
EN 60512-25-7, EN60512-25-7
Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave
18/04/2005
EN 60512-2-6, EN60512-2-6
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2f. Housing
24/05/2002
EN 60512-3-1, EN60512-3-1
Connectors for electronic equipment. Tests and measurements. Insulation tests. Test 3a. Insulation resistance
16/05/2002
EN 60512-4-1, EN60512-4-1
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. est 4a. Voltage proof
31/07/2003
EN 60512-4-2, EN60512-4-2
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4b. Partial discharge
29/05/2002
EN 60512-4-3, EN60512-4-3
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4c. Voltage proof of pre-insulated crimp b
31/05/2002
EN 60512-5-1, EN60512-5-1
Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5a. Temperature rise
29/05/2002
EN 60512-5-2, EN60512-5-2
Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5b. Current-temperature deratin
06/06/2002
EN 60512-6-1, EN60512-6-1
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6a. Acceleration, steady state
30/05/2002
EN 60512-6-2, EN60512-6-2
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6b. Bump
05/06/2002
EN 60512-6-3, EN60512-6-3
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6c. Shock
29/05/2002
EN 60512-6-4, EN60512-6-4
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6d. Vibration (sinusoidal)
24/05/2002
EN 60512-6-5, EN60512-6-5
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Dynamic stress tests. Test
15/07/2001
EN 60512-9-3, EN60512-9-3
Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9c: Mechanical operation (engaging/sperating) w
28/04/2006
EN 60514, EN60514
Acceptance inspection of class 2 alternating-current watthour meters
15/08/1995
EN 60517, EN60517
Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
15/06/1992
EN 60519-1, EN60519-1
Safety in electroheat installations. General requirements
26/11/2003
EN 60519-10, EN60519-10
Safety in electroheat installations. Particular requirements for electrical resistance trace heating systems for industrial and co
24/02/2006
EN 60519-11, EN60519-11
Safety in electroheat installations. Particular requirements for installations for electromagnetic stirring, transport or pouring
15/08/1997
EN 60519-2, EN60519-2
Safety in electroheat installations. Particular requirements for resistance heating equipment
15/04/1994
EN 60519-21, EN60519-21
Safety in electroheat installations. Particular requirements for resistance heating equipment. Heating and melting glass equipment
15/07/1998
EN 60519-3, EN60519-3
Safety in electroheat installations. Particular requirements for induction and conduction heating and induction melting installati
21/10/2005
EN 60519-4, EN60519-4
Safety in electroheat installations. Particular requirements for arc furnace installations
15/08/1997
EN 60519-6, EN60519-6
Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment
03/07/2003
EN 60519-8, EN60519-8
Safety in electroheat installations. Particular requirements for electroslag remelting furnaces
23/02/2006
EN 60519-9, EN60519-9
Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
15/11/1993
EN 60519-9, EN60519-9
Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
24/01/2006
EN 60522, EN60522
Determination of the permanent filtration of X-ray tube assemblies
15/06/1999
EN 60523, EN60523
Direct-current potentiometers
29/08/1980
EN 60524, EN60524
Direct-current resistive volt ratio boxes
31/08/1979
EN 60526, EN60526
High-voltage cable plug and socket connections for medical X-ray equipment
16/02/2005
EN 60529, EN60529
Specification for degrees of protection provided by enclosures (IP code)
31/01/1992
EN 60531, EN60531
Household electric thermal storage room heaters. Methods for measuring performance
15/09/2000
EN 60534-1, EN60534-1
Industrial-process control valves. Control valve terminology and general considerations
31/03/2005
EN 60534-2-1, EN60534-2-1
Industrial-process control valves. Flow capacity. Flow capacity. Sizing equations for fluid flow under installed conditions
15/01/1999
EN 60534-2-3, EN60534-2-3
Industrial-process control valves. Flow capacity. Test procedures
15/06/1998
EN 60534-2-5, EN60534-2-5
Industrial-process control valves. Flow capacity. Sizing equations for fluid flow through multistage control valves with interstag
07/11/2003
EN 60534-3-1, EN60534-3-1
Industrial-process control valves. Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and cent
15/08/2000
EN 60534-3-2, EN60534-3-2
Industrial-process control valves. Dimensions. Face-to-face dimensions for rotary control valves except butterfly valves
28/10/2001
EN 60534-3-3, EN60534-3-3
Industrial-process control valves. Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control v
15/12/1998
EN 60534-5, EN60534-5
Industrial-process control valves. Marking
12/05/2004
EN 60534-6-1, EN60534-6-1
Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on linear
15/03/1998
EN 60534-6-2, EN60534-6-2
Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on rotary
15/06/2001
EN 60534-8-1, EN60534-8-1
Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through con
01/02/2006
EN 60534-8-2, EN60534-8-2
Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through co
31/10/1991
EN 60534-8-3, EN60534-8-3
Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method. Control valve aerodyna
15/12/2000
EN 60534-8-4, EN60534-8-4
Industrial-process control valves. Noise considerations. Prediction of noise generated by hydrodynamic flow
15/10/1994
EN 60539-1, EN60539-1
Directly heated negative temperature coefficient thermistors. Generic specification
01/05/2002
EN 60539-2, EN60539-2
Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coeffici
31/05/2004
EN 60544-1, EN60544-1
Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry
15/05/1995
EN 60544-4, EN60544-4
Electrical insulating materials. Determination of the effects of ionizing radiation. Classification system for service in radiatio
15/12/2003
EN 60544-5, EN60544-5
Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in servic
13/06/2003
EN 60546-1, EN60546-1
Controllers with analogue signals for use in industrial-process control systems. Controllers with analogue signals for use in indu
28/02/1989
EN 60546-2, EN60546-2
Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
28/02/1989
EN 60554-2, EN60554-2
Cellulosic papers for electrical purposes. Methods of test
19/06/2002
EN 60564, EN60564
D.C. bridges for measuring resistance
31/07/1979
EN 60567, EN60567
Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance
02/12/2005
EN 60570, EN60570
Electrical supply track systems for luminaires
15/05/1997
EN 60570, EN60570
Electrical supply track systems for luminaires
24/09/2003
EN 60570-2-1, EN60570-2-1
Electrical supply track systems for luminaires. Mixed supply systems. Classes I and III
15/05/1995
EN 60574-21, EN60574-21
Specification for audiovisual, video and television equipment and systems. Video tape leader and trailer for education and trainin
15/04/1994
EN 60580, EN60580
Dose area product meters
15/08/2000
EN 60584-1, EN60584-1
Thermocouples. Reference tables
15/07/1996
EN 60584-2, EN60584-2
Thermocouples. Tolerances
20/12/1991


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE