|
Title |
Date |
|
EN 71-9, EN71-9 |
Safety of toys. Organic chemical compounds. Requirements |
25/02/2005 |
EN 720-1, EN720-1 |
Transportable gas cylinders. Gases and gas mixtures. Properties of pure gases |
15/08/1999 |
EN 720-2, EN720-2 |
Transportable gas cylinders. Gases and gas mixtures. Determination of flammability and oxidizing ability of gases and gas mixtures |
15/03/1997 |
EN 721, EN721 |
Leisure accommodation vehicles. Safety ventilation requirements |
17/01/2005 |
EN 722-1, EN722-1 |
Leisure accommodation vehicles. Liquid fuel heating systems. Caravans and caravan holiday homes |
23/06/2005 |
EN 723, EN723 |
Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
15/12/1996 |
EN 724, EN724 |
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices |
15/04/1995 |
EN 725-1, EN725-1 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in alumina |
15/07/1997 |
EN 725-10, EN725-10 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of compaction properties |
15/07/1997 |
EN 725-12, EN725-12 |
Advanced technical ceramics. Methods of test for ceramic powders. Chemical analysis of zirconia |
15/06/2001 |
EN 725-3, EN725-3 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of non-oxides by thermal ext |
15/05/1994 |
EN 725-5, EN725-5 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the particle size distribution |
15/08/1996 |
EN 725-6, EN725-6 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the specific surface area |
15/09/1996 |
EN 725-7, EN725-7 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the absolute density |
15/06/1996 |
EN 725-8, EN725-8 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of tapped bulk density |
28/04/2006 |
EN 725-9, EN725-9 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of untapped bulk density |
16/03/2006 |
EN 726-1, EN726-1 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. System overview |
15/08/1995 |
EN 726-2, EN726-2 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Security framework |
15/04/1996 |
EN 726-3, EN726-3 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card requireme |
15/01/1996 |
EN 726-4, EN726-4 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card related t |
15/08/1995 |
EN 726-5, EN726-5 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Payment methods |
15/09/1999 |
EN 726-6, EN726-6 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Telecommunication features |
15/05/1996 |
EN 726-7, EN726-7 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Security module |
15/11/1999 |
EN 727, EN727 |
Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temperature (VST) |
15/06/1995 |
EN 728, EN728 |
Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time |
15/07/1997 |
EN 730-1, EN730-1 |
Gas welding equipment. Safety devices. Incorporating a flame (flashback) arrestor |
13/11/2002 |
EN 730-2, EN730-2 |
Gas welding equipment. Safety devices. Not incorporating a flame (flashback) arrestor |
13/11/2002 |
EN 731, EN731 |
Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
15/01/1996 |
EN 732, EN732 |
Specifications for dedicated liquefied petroleum gas appliances. Absorption refrigerators |
15/05/1999 |
EN 733, EN733 |
End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system |
15/12/1995 |
EN 734, EN734 |
Side channel pumps PN 40. Nominal duty point, main dimensions, designation system |
15/12/1995 |
EN 735, EN735 |
Overall dimensions of rotodynamic pumps. Tolerances |
15/12/1995 |
EN 736-1, EN736-1 |
Valves. Terminology. Definition of types of valves |
15/07/1995 |
EN 736-2, EN736-2 |
Valves. Terminology. Definition of components of valves |
15/12/1997 |
EN 736-3, EN736-3 |
Valves. Terminology. Definition of terms |
15/08/1999 |
EN 737-1, EN737-1 |
Medical gas pipeline systems. Terminal units for compressed medical gases and vacuum |
15/06/1998 |
EN 737-2, EN737-2 |
Medical gas pipeline systems. Anaesthetic gas scavenging disposal systems. Basic requirements |
15/09/1998 |
EN 737-3, EN737-3 |
Medical gas pipeline systems. Pipelines for compressed medical gases and vacuum |
15/03/2000 |
EN 737-4, EN737-4 |
Medical gas pipeline systems. Terminal units for anaesthetic gas scavenging systems |
15/05/1998 |
EN 738-1, EN738-1 |
Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow metering devices |
15/07/1997 |
EN 738-2, EN738-2 |
Pressure regulators for use with medical gases. Manifold and line pressure regulators |
15/03/1999 |
EN 738-3, EN738-3 |
Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves |
15/03/1999 |
EN 738-4, EN738-4 |
Pressure regulators for use with medical gases. Low-pressure regulators intended for incorporation into medical equipment |
15/03/1999 |
EN 739, EN739 |
Low-pressure hose assemblies for use with medical gases |
15/06/1998 |
EN 740, EN740 |
Anaesthetic workstations and their modules. Particular requirements |
15/03/1999 |
EN 741, EN741 |
Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk mat |
15/05/2000 |
EN 744, EN744 |
Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock met |
15/02/1996 |
EN 745, EN745 |
Agricultural machinery. Rotary mowers and flail-mowers. Safety |
15/09/1999 |
EN 746-1, EN746-1 |
Industrial thermoprocessing equipment. Common safety requirements for industrial thermoprocessing equipment |
15/11/1997 |
EN 746-2, EN746-2 |
Industrial thermoprocessing equipment. Safety requirements for combustion and fuel handling systems |
15/09/1997 |
EN 746-3, EN746-3 |
Industrial thermoprocessing equipment. Safety requirements for the generation and use of atmosphere gases |
15/09/1997 |
EN 746-4, EN746-4 |
Industrial thermoprocessing equipment. Particular safety requirements for hot dip galvanizing thermoprocessing equipment |
15/04/2000 |
EN 746-5, EN746-5 |
Industrial thermoprocessing equipment. Particular safety requirements for salt bath thermoprocessing equipment |
15/11/2000 |
EN 746-8, EN746-8 |
Industrial thermoprocessing equipment. Particular safety requirements for quenching equipment |
15/11/2000 |
EN 747-1, EN747-1 |
Furniture. Bunk beds for domestic use. Safety requirements |
15/05/1993 |
EN 747-2, EN747-2 |
Furniture. Bunk beds for domestic use. Test methods |
15/05/1993 |
EN 748, EN748 |
Playing field equipment. Football goals. Functional and safety requirements, test methods |
30/11/2004 |
EN 749, EN749 |
Playing field equipment. Handball goals. Functional and safety requirements, test methods |
05/11/2004 |
EN 750, EN750 |
Playing field equipment. Hockey goals. Functional and safety requirements, test methods |
22/11/2004 |
EN 751-1, EN751-1 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Anaerobic jointing com |
15/07/1997 |
EN 751-2, EN751-2 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Non-hardening jointing |
15/07/1997 |
EN 751-3, EN751-3 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes |
15/07/1997 |
EN 752-1, EN752-1 |
Drain and sewer systems outside buildings. Generalities and definitions |
15/04/1996 |
EN 752-2, EN752-2 |
Drain and sewer systems outside buildings. Performance requirements |
15/03/1997 |
EN 752-3, EN752-3 |
Drain and sewer systems outside buildings. Planning |
15/03/1997 |
EN 752-4, EN752-4 |
Drain and sewer systems outside buildings. Hydraulic design and environmental considerations |
15/06/1998 |
EN 752-5, EN752-5 |
Drain and sewer systems outside buildings. Rehabilitation |
15/03/1998 |
EN 752-6, EN752-6 |
Drain and sewer systems outside buildings. Pumping installations |
15/09/1998 |
EN 752-7, EN752-7 |
Drain and sewer systems outside buildings. Maintenance and operations |
15/09/1998 |
EN 753-1, EN753-1 |
Identification card systems. Intersector thin flexible cards. General technical specifications |
15/11/1997 |
EN 753-2, EN753-2 |
Identification card systems. Intersector thin flexible cards. Magnetic recording technique |
15/10/1997 |
EN 753-3, EN753-3 |
Identification card systems. Intersector thin flexible cards. Test methods |
15/12/1999 |
EN 754-1, EN754-1 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Technical conditions for inspection and delivery |
15/09/1997 |
EN 754-2, EN754-2 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties |
15/09/1997 |
EN 754-3, EN754-3 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Round bars, tolerances on dimensions and form |
15/06/1996 |
EN 754-4, EN754-4 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Square bars, tolerances on dimensions and form |
15/06/1996 |
EN 754-5, EN754-5 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Rectangular bars, tolerances on dimensions and form |
15/06/1996 |
EN 754-6, EN754-6 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Hexagonal bars, tolerances on dimensions and form |
15/06/1996 |
EN 754-7, EN754-7 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Seamless tubes, tolerances on dimensions and form |
15/12/1998 |
EN 754-8, EN754-8 |
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Porthole tubes, tolerances on dimensions and form |
15/12/1998 |
EN 755-1, EN755-1 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Technical conditions for inspection and delivery |
15/09/1997 |
EN 755-2, EN755-2 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties |
15/09/1997 |
EN 755-3, EN755-3 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Round bars, tolerances on dimensions and form |
15/06/1996 |
EN 755-4, EN755-4 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Square bars, tolerances on dimensions and form |
15/06/1996 |
EN 755-5, EN755-5 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Rectangular bars, tolerances on dimensions and form |
15/06/1996 |
EN 755-6, EN755-6 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Hexagonal bars, tolerances on dimensions and form |
15/06/1996 |
EN 755-7, EN755-7 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Seamless tubes, tolerances on dimensions and form |
15/12/1998 |
EN 755-8, EN755-8 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Porthole tubes, tolerances on dimensions and form |
15/12/1998 |
EN 755-9, EN755-9 |
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimensions and form |
15/06/2001 |
EN 756, EN756 |
Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non a |
10/03/2004 |
EN 757, EN757 |
Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification |
15/09/1997 |
EN 758, EN758 |
Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain stee |
15/06/1997 |
EN 760, EN760 |
Welding consumables. Fluxes for submerged arc welding. Classification |
15/10/1996 |
EN 761, EN761 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditio |
15/07/1995 |
EN 764-1, EN764-1 |
Pressure equipment. Terminology. Pressure, temperature, volume, nominal size |
14/06/2004 |
EN 764-2, EN764-2 |
Pressure equipment. Quantities, symbols and units |
13/06/2002 |
EN 764-3, EN764-3 |
Pressure equipment. Definition of parties involved |
13/06/2002 |
EN 764-4, EN764-4 |
Pressure equipment. Establishment of technical delivery conditions for metallic materials |
07/11/2002 |
EN 764-5, EN764-5 |
Pressure equipment. Compliance and inspection documentation of materials |
04/12/2002 |
EN 764-7, EN764-7 |
Pressure equipment. Safety systems for unfired pressure vessels |
13/06/2002 |
EN 765, EN765 |
Sacks for the transport of food aid. Sacks made of woven polyolefin fabric other than polypropylene only |
15/09/1994 |
EN 766, EN766 |
Sacks for the transport of food aid. Sacks made of jute fabric |
15/09/1994 |
EN 767, EN767 |
Sacks for the transport of food aid. Sacks made of woven jute/polyolefin fabric |
15/09/1994 |
EN 768, EN768 |
Sacks for the transport of food aid. Sacks made of lined cotton fabric |
15/09/1994 |
EN 769, EN769 |
Sacks for the transport of food aid. Sacks made of woven cotton/polyolefin fabric |
15/10/1994 |
EN 770, EN770 |
Sacks for the transport of food aid. Paper sacks |
15/10/1994 |
EN 771-1, EN771-1 |
Specification for masonry units. Clay masonry units |
29/09/2003 |
EN 771-2, EN771-2 |
Specification for masonry units. Calcium silicate masonry units |
29/09/2003 |
EN 771-3, EN771-3 |
Specification for masonry units. Aggregate concrete masonry units (dense and light-weight aggregates) |
17/03/2004 |
EN 771-4, EN771-4 |
Specification for masonry units. Autoclaved aerated concrete masonry units |
30/10/2003 |
EN 771-5, EN771-5 |
Specification for masonry units. Manufactured stone masonry units |
18/03/2004 |
EN 771-6, EN771-6 |
Specification for masonry units. Natural stone masonry units |
11/01/2006 |
EN 772-1, EN772-1 |
Methods of test for masonry units. Determination of compressive strength |
15/08/2000 |
EN 772-10, EN772-10 |
Methods of test for masonry units. Determination of moisture content of calcium silicate and autoclaved aerated concrete units |
15/07/1999 |
EN 772-11, EN772-11 |
Methods of test for masonry units. Determination of water absorption of aggregate concrete, manufactured stone and natural stone m |
15/09/2000 |
EN 772-13, EN772-13 |
Methods of test for masonry units. Determination of net and gross dry density of masonry units (except for natural stone) |
15/08/2000 |
EN 772-14, EN772-14 |
Methods of test for masonry units. Determination of moisture movement of aggregate concrete and manufactured stone masonry units |
31/01/2002 |
EN 772-15, EN772-15 |
Methods of test for masonry units. Determination of water vapour permeability of autoclaved aerated concrete masonry units |
15/09/2000 |
EN 772-16, EN772-16 |
Methods of test for masonry units. Determination of dimensions |
15/08/2000 |
EN 772-18, EN772-18 |
Methods of test for masonry units. Determination of freeze-thaw resistance of calcium silicate masonry units |
15/07/2000 |
EN 772-19, EN772-19 |
Methods of test for masonry units. Determination of moisture expansion of large horizontally perforated clay masonry units |
15/07/2000 |
EN 772-2, EN772-2 |
Methods of test for masonry units. Determination of percentage area of voids in masonry units (by paper indentation) |
15/12/1998 |
EN 772-20, EN772-20 |
Methods of test for masonry units. Determination of flatness of faces of masonry units |
15/07/2000 |
EN 772-3, EN772-3 |
Methods of test for masonry units. Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighi |
15/12/1998 |
EN 772-4, EN772-4 |
Methods of test for masonry units. Determination of real and bulk density and of total and open porosity for natural stone masonry |
15/12/1998 |
