EN Norms and Standards
ISO, BSI, EN and Others





EN STANDARDS: EN 772-5, EN772-5 -

Standard
Title
Date
EN 772-5, EN772-5
Methods of test for masonry units. Determination of the active soluble salts content of clay masonry units
14/03/2002
EN 772-6, EN772-6
Methods of test for masonry units. Determination of bending tensile strength of aggregate concrete masonry units
04/12/2001
EN 772-7, EN772-7
Methods of test for masonry units. Determination of water absorption of clay masonry damp proof course units by boiling in water
15/12/1998
EN 772-9, EN772-9
Methods of test for masonry units. Determination of volume and percentage of voids and net volume of clay and calcium silicate mas
15/12/1998
EN 773, EN773
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
15/08/1999
EN 774, EN774
Garden equipment. Hand held, integrally powered hedge trimmers. Safety
15/11/1996
EN 777-1, EN777-1
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System D, safety
15/12/1999
EN 777-2, EN777-2
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System E, safety
15/12/1999
EN 777-3, EN777-3
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System F, safety
15/02/2000
EN 777-4, EN777-4
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System H, safety
15/10/1999
EN 778, EN778
Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assis
15/07/1998
EN 779, EN779
Particulate air filters for general ventilation. Determination of the filtration performance
05/12/2002
EN 786, EN786
Garden equipment. Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers. Mechanical safety
15/11/1996
EN 787, EN787
Sacks for the transport of food aid. Sacks made of polyethylene film
15/09/1994
EN 788, EN788
Sacks for the transport of food aid. Tubular sacks made of composite film
15/10/1994
EN 789, EN789
Timber structures. Test methods. Determination of mechanical properties of wood based panels
16/03/2005
EN 790, EN790
Inland navigation vessels. Stairs with inclination angles of 45$0D to 60$0D. Requirements, types
15/08/2001
EN 791, EN791
Drill rigs. Safety
15/06/1996
EN 792-1, EN792-1
Hand-held non-electric power tools. Safety requirements. Assembly power tools for non-threaded mechanical fasteners
15/08/2000
EN 792-10, EN792-10
Hand-held non-electric power tools. Safety requirements. Compression power tools
15/08/2000
EN 792-11, EN792-11
Hand-held non-electric power tools. Safety requirements. Nibblers and shears
15/08/2000
EN 792-12, EN792-12
Hand-held non-electric power tools. Safety requirements. Small circular, small oscillating and reciprocating saws
15/08/2000
EN 792-13, EN792-13
Hand-held non-electric power tools. Safety requirements. Fastener driving tools
15/10/2000
EN 792-2, EN792-2
Hand-held non-electric power tools. Safety requirements. Cutting-off and crimping power tools
15/08/2000
EN 792-3, EN792-3
Hand-held non-electric power tools. Safety requirements. Drills and tappers
15/08/2000
EN 792-4, EN792-4
Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools
15/08/2000
EN 792-5, EN792-5
Hand-held non-electric power tools. Safety requirements. Rotary percussive drills
15/08/2000
EN 792-6, EN792-6
Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners
15/08/2000
EN 792-7, EN792-7
Hand-held non-electric power tools. Safety requirements. Grinders
20/09/2002
EN 792-8, EN792-8
Hand-held non-electric power tools. Safety requirements. Sanders and polishers
15/03/2001
EN 792-9, EN792-9
Hand-held non-electric power tools. Safety requirements. Die grinders
15/03/2001
EN 794-1, EN794-1
Lung ventilators. Particular requirements for critical care ventilators
15/11/1997
EN 794-3, EN794-3
Lung ventilators. Particular requirements for emergency and transport ventilators
15/01/1999
EN 795, EN795
Protection against falls from a height. Anchor devices. Requirements and testing
15/02/1997
EN 797, EN797
Bar coding. Symbology specifications. 'EAN/UPC'
15/05/1996
EN 798, EN798
Bar coding. Symbology specifications. 'Codabar'
15/05/1996
EN 80, EN80
Wall-hung urinals. Connecting dimensions
15/08/2001
EN 802, EN802
Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximu
15/07/1995
EN 803, EN803
Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test
15/07/1995
EN 804, EN804
Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resist
15/07/1995
EN 80416-1, EN80416-1
Basic principles for graphical symbols for use on equipment. Creation of symbol originals
11/01/2002
EN 80416-2, EN80416-2
Basic principles for graphical symbols for use on equipment. Form and use of arrows
15/08/2001
EN 80416-3, EN80416-3
Basic principles for graphical symbols for use on equipment. Guidelines for the application of graphical symbols
19/06/2003
EN 805, EN805
Water supply. Requirements for systems and components outside buildings
15/09/2000
EN 806-1, EN806-1
Specifications for installations inside buildings conveying water for human consumption. General
15/11/2000
EN 806-2, EN806-2
Specifications for installations inside buildings conveying water for human consumption. Design
27/04/2005
EN 806-3, EN806-3
Specifications for installations inside buildings conveying water for human consumption. Pipe sizing. Simplified method
28/04/2006
EN 809, EN809
Pumps and pump units for liquids. Common safety requirements
15/12/1998
EN 810, EN810
Dehumidifiers with electrically driven compressors. Rating tests, marking, operational requirements and technical data sheet
15/09/1997
EN 811, EN811
Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs
15/03/1997
EN 81-1, EN81-1
Safety rules for the construction and installation of lifts. Electric lifts
15/11/1998
EN 812, EN812
Industrial bump caps
15/02/1998
EN 81-2, EN81-2
Safety rules for the construction and installation of lifts. Hydraulic lifts
15/11/1998
EN 81-28, EN81-28
Safety rules for the construction and installation of lifts. Remote alarm on passenger and goods passenger lifts
01/07/2003
EN 813, EN813
Personal protective equipment for prevention of falls from a height. Sit harnesses
15/06/1997
EN 81-3, EN81-3
Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts
15/01/2001
EN 815, EN815
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
15/05/1997
EN 81-58, EN81-58
Safety rules for the construction and installation of lifts. Examination and tests. Landing doors fire resistance test
28/07/2003
EN 816, EN816
Sanitary tapware. Automatic shut-off valves PN 10
15/06/1997
EN 817, EN817
Sanitary tapware. Mechanical mixers (PN 10). General technical specifications
15/01/1998
EN 81-70, EN81-70
Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Acce
03/06/2003
EN 81-71, EN81-71
Safety rules for the construction and installation of lifts. Particular applications to passenger lifts and goods passenger lifts.
20/06/2005
EN 81714-2, EN81714-2
Design of graphical symbols for use in the technical documentation of products. Specification for graphical symbols in a computer
15/10/1999
EN 81714-3, EN81714-3
Design of graphical symbols for use in the technical documentation of products. Classification of connect nodes, networks and thei
26/09/2001
EN 81-72, EN81-72
Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Fire
22/07/2003
EN 81-73, EN81-73
Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Beha
24/06/2005
EN 81-80, EN81-80
Safety rules for the construction and installation of lifts. Existing lifts. Rules for the improvement of safety of existing passe
17/12/2003
EN 818-1, EN818-1
Short link chain for lifting purposes. Safety. General conditions of acceptance
15/11/1996
EN 818-2, EN818-2
Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 8
15/04/1997
EN 818-3, EN818-3
Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 4
15/09/1999
EN 818-4, EN818-4
Short link chain for lifting purposes. Safety. Chain slings. Grade 8
15/04/1997
EN 818-5, EN818-5
Short link chain for lifting purposes. Safety. Chain slings. Grade 4
15/09/1999
EN 818-6, EN818-6
Short link chain for lifting purposes. Safety. Chain slings. Specification for information for use and maintenance to be provided
15/04/2000
EN 818-7, EN818-7
Short link chain for lifting purposes. Safety. Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
19/03/2002
EN 820-1, EN820-1
Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural stren
06/03/2003
EN 820-2, EN820-2
Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of self-loaded de
22/04/2003
EN 820-3, EN820-3
Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties. Determination of resistance to thermal shock by wat
03/09/2004
EN 82045-1, EN82045-1
Document management. Principles and methods
20/12/2001
EN 82045-2, EN82045-2
Document management. Metadata elements and information reference model
25/02/2005
EN 821-1, EN821-1
Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of thermal expansion
15/09/1995
EN 821-2, EN821-2
Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of thermal diffusivity by the laser fl
15/11/1997
EN 821-3, EN821-3
Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity
20/04/2005
EN 822, EN822
Thermal insulating products for building applications. Determination of length and width
15/03/1995
EN 823, EN823
Thermal insulating products for building applications. Determination of thickness
15/02/1995
EN 824, EN824
Thermal insulating products for building applications. Determination of squareness
15/02/1995
EN 825, EN825
Thermal insulating products for building applications. Determination of flatness
15/02/1995
EN 826, EN826
Thermal insulating products for building applications. Determination of compression behaviour
15/12/1996
EN 827, EN827
Adhesives. Determination of conventional solids content and constant mass solids content
25/01/2006
EN 828, EN828
Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
15/12/1998
EN 829, EN829
In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests
15/01/1997
EN 832, EN832
Thermal performance of buildings. Calculation of energy use for heating. Residential buildings
15/07/1999
EN 834, EN834
Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
15/08/1995
EN 835, EN835
Heat cost allocators for the determination of the consumption of room heating radiators. Appliances without an electrical energy s
15/08/1995
EN 836, EN836
Garden equipment. Powered lawnmowers. Safety
15/12/1997
EN 837-1, EN837-1
Pressure gauges. Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
15/03/1998
EN 837-2, EN837-2
Pressure gauges. Selection and installation recommendations for pressure gauges
15/03/1998
EN 837-3, EN837-3
Pressure gauges. Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing
15/07/1998
EN 838, EN838
Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods
15/09/1996
EN 84, EN84
Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
15/07/1997
EN 840-1, EN840-1
Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
18/03/2004
EN 840-2, EN840-2
Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting d
18/03/2004
EN 840-3, EN840-3
Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting d
18/03/2004
EN 840-4, EN840-4
Mobile waste containers. Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wi
17/03/2004
EN 840-5, EN840-5
Mobile waste containers. Performance requirements and test methods
17/03/2004
EN 840-6, EN840-6
Mobile waste containers. Safety and health requirements
18/03/2004
EN 841, EN841
Bar coding. Symbology specifications. Format description
15/05/1996
EN 842, EN842
Safety of machinery. Visual danger signals. General requirements, design and testing
15/11/1996
EN 843-1, EN843-1
Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Determination of flexural strength
15/03/1995
EN 844-1, EN844-1
Round and sawn timber. Terminology. General terms common to round timber and sawn timber
15/07/1995
EN 844-10, EN844-10
Round and sawn timber. Terminology. Terms relating to stain and fungal attack
15/08/1998
EN 844-11, EN844-11
Round and sawn timber. Terminology. Terms relating to degrade by insects
15/08/1998
EN 844-12, EN844-12
Round and sawn timber. Terminology. Additional terms and general
15/01/2001
EN 844-2, EN844-2
Round and sawn timber. Terminology. General terms relating to round timber
15/10/1997
EN 844-3, EN844-3
Round and sawn timber. Terminology. General terms relating to sawn timber
15/07/1995
EN 844-4, EN844-4
Round and sawn timber. Terminology. Terms relating to moisture content
15/10/1997
EN 844-5, EN844-5
Round and sawn timber. Terminology. Terms relating to dimensions of round timber
15/10/1997
EN 844-6, EN844-6
Round and sawn timber. Terminology. Terms relating to dimensions of sawn timber
15/10/1997
EN 844-7, EN844-7
Round and sawn timber. Terminology. Terms relating to anatomical structure of timber
15/10/1997
EN 844-8, EN844-8
Round and sawn timber. Terminology. Terms relating to features of round timber
15/10/1997
EN 844-9, EN844-9
Round and sawn timber. Terminology. Terms relating to features of sawn timber
15/10/1997
EN 845-1, EN845-1
Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets
16/09/2003
EN 845-2, EN845-2
Specification for ancillary components for masonry. Lintels
16/09/2003
EN 845-3, EN845-3
Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork
16/09/2003
EN 846-10, EN846-10
Methods of test for ancillary components for masonry. Determination of load capacity and load deflection characteristics of bracke
15/06/2000
EN 846-11, EN846-11
Methods of test for ancillary components for masonry. Determination of dimensions and bow of lintels
15/06/2000


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE